
HomeKit Over Thread With HomePod mini and Eve
A smart home without any limitations: discover how HomePod mini, Eve and Thread bring your smart home to the next level.
HomePod mini is Apple’s new powerful smart speaker and most affordable home hub yet, with built-in Siri intelligence that provides quick and easy access to smart home accessories. That's not only great news for conveniently controlling your connected home, but also for reliability: HomePod mini adds mesh networking functionality to HomeKit, built on Thread. This cutting-edge technology was developed specifically for a responsive, robust, and secure smart home. A Bluetooth-equipped HomeKit accessory can now optionally offer Thread connectivity, making it even more powerful.
Eve is All Systems Go.
Many Eve accessories on sale today are equipped with the latest generation Eve Core chipsets, which can support Thread. Thread-enabled firmware updates will become available this month for current Eve Door & Window and European Eve Energy models. We expect to be able to offer free firmware updates for the current generation of Eve Aqua and Eve Thermo soon and we’re working on bringing Thread technology to more Eve accessories going forward.
Discover here if your Eve accessory supports Thread
Bluetooth Remains. Thread Enhances.
Bluetooth is required for HomeKit over Thread, so Bluetooth remains available and your accessories continue to work as they always have. Now, as soon as you add HomePod mini to your home, your Thread-enabled Eve accessories will also be able to communicate over Thread. This happens automatically without you needing to configure anything, and it brings some immediate benefits:
Thread is based on the universally deployed Internet Protocol version 6 (IPv6) standard, making it extremely robust. A Thread network does not rely on a central hub, such as a bridge, so there’s no single point of failure. And Thread has the ability to self-heal – if one node (or accessory in your Thread network) becomes unavailable, the data packets will select an alternate route automatically and the network simply continues to work. And while Wi-Fi and Bluetooth networks tend to become somewhat unreliable and challenging to manage with a large number of accessories connected, a Thread network will scale up easily and actually become more robust with every new accessoy.
Wi-Fi and Bluetooth coverage of your home can be extended by adding repeaters and additional dedicated hardware such as home hubs or Eve Extend to increase the range of HomeKit-enabled Bluetooth accessories. A Thread network expands pretty much automatically as you add more accessories. As an example, if your Eve Aqua is beyond the reach of your HomePod mini, an Eve Energy somewhere in the middle could connect the Eve Aqua to the Thread network. This is the power of Thread´s mesh networking: it is completely automatic, fully interoperable, and involves zero configuration.
Thread also paves the way for many future improvements. Among them: HomeKit-enabled accessories will be able to talk to each other over IPv6, thereby opening up a host of new applications especially for battery powered accessories. Thread has extremely low power consumption, so we’re expecting to see a considerable increase in battery life over the next years. On top of all this, Thread – alongside Wi-Fi and Bluetooth – is a pillar of the upcoming Matter standard, which is another reason why you’re future-proof with Eve.
The Future Is HomePod Mini – Not Bridges.
HomePod mini is your key to enable your HomeKit accessories to communicate over Thread. Apart from that, you don’t need anything else: no proprietary bridges or gateways, and no starter kits. With HomePod mini and Thread-equipped Eve accessories, enjoy the smart home of the future – today.
Posts you might also be interested in.
Schedules & location control: Smart heating with Eve Thermo
Enjoy a cozy home when you’re there, and save energy when you’re not – that's smart heating, courtesy of Eve Thermo. Now it’s easier than ever to combine the sheer convenience of schedules with location-based heating. Read on to learn how to enjoy all these great benefits.
The home hub: An essential device for HomeKit-enabled accessories
Whether you connect to your HomeKit accessories via Wi-Fi, Bluetooth or Thread, your connected home is simply incomplete without a home hub – an Apple TV, HomePod or HomePod mini. Your home hub gives you both secure access to your accessories while you’re on the go and enables you to set up automations.
Eve – Welcome to a smart home that’s 100% private
Home is your most private space. The only place where you can do as you please, on your terms. However, if you live in a smart home, you will also produce loads of data that others will be only too keen to get their hands on. That’s why we...
- Reply
Hello Sam! Please open a ticket in our support system: https://www.evehome.com/en/support/ticketBest regards, Volker
- Reply
Hallo, eine kurze Verständnisfrage: Wenn ich mit mehreren Eve Energy und einem Apple Homepod mini den Stromverbrauch in meiner Wohnung „steuern“ möchte, muss der Homepod als Router des Thread-Netzwerks immer am Strom / aktiv sein, meinen vorhandenen WLAN Router könnte ich aber bei Abwesenheit oder nachts vom Router trennen? Oder könnte man alles (Homepod und alles was ausgeschaltet werden soll) vom Strom nehmen, die Eve Energy dann aber allerdings nur noch via App und nicht über Siri@Pod steuern?Danke für die Beantwortung dieser absoluten Einsteiger-Frage.
Viele Grüße , Dan
- Reply
Hallo Dan! Zum Steuern über Automationen ist immer eine Steuerzentrale voraus gesetzt und sie sollte auch Internetverbindung haben, da Automationen über iCloud synchronisiert werden. Also bitte alles verbunden lassen. Viele Grüße, Volker- Reply
Hallo, mein Heizkörperthermostat im Schlafzimmer erreiche ich leider nicht, obwohl ich einen Eve Energy dazwischen geschaltet habe. Seltsamerweise ging es am Anfang, aber nach ca 2. Wochen keine Chance mehr . Jetzt meine Frage: Bringt es was wenn ich einen 2ten Homepod Mini ins Schlafzimmer stelle? Kommuniziert der Homepod Mini was im Wohnzimmer steht und als Zentrale dient, dann mit dem zweiten Home Pod Mini und sendet das Signal an das Heizkörperthermostat weiter?- Reply
Hallo Chris! Das sollte auch ohne zweiten HomePod mini gehen. Bitte öffnen Sie ein Ticket in unserem Support-Systemhttps://www.evehome.com/de/support/ticket
Viele Grüße, Volker
- Reply
I bought 2 eve energy UK smart plugs, I can see my 3 HomePod minis as Thread Boarder Routers, but they don’t show up on the eve app as speakers. I’ve tried resetting the HomePods and the router, I’ve also tried adding them as devices. Any suggestions?- Reply
Hello Derek! So far, third parties don't have access to accessories that allow playback like TV-Sets, Apple TVs or the HomePod - Apple only. Best regards, Volker- Reply
Hallo!Habe seit ein paar Wochen den HomePod mini, einige eve thermo und eve energy im Einsatz. Leider funktionieren die Automationen bei den Thermo über die Homeapp auf dem iPhone und über die Eve App nicht. Am Anfang ging das mal, jetzt leider nicht mehr. Habe gelesen man soll alle alle Geräte aktualisieren. Bei dem Eve Thermo verstehe ich nicht wie das geht. Ich sehe zwar die Firmware Version in der Eve App, aber ich sehe nirgends ob das die aktuelle Version ist und und wie ich gegebenenfalls updaten kann?
- Reply
Hallo Kim! Ist ein Firmware-Update verfügbar, sehen Sie in Eve einen roten Kreis mit einer Zahl über Einstellungen. Ich vermute, Sie haben ein Thread-Problem. Bitte öffnen Sie ein Ticket in unserem Support-Systemhttps://www.evehome.com/de/support/ticket
Viele Grüße, Volker
- Reply
Hallo Volker,habe noch eine Menge nach dem Ausschlussprinzip ausprobiert...und jetzt scheinbar eine Lösung gefunden. Ich habe alle Automationen in der Apple Home App gelöscht (dort hatte ich Sie auch eingerichtet) und in der EVE App neu angelegt. Jetzt geht alles wieder. Seit ein paar Tagen problemlos :)
- Reply
Hallo, ich bin aktuell dabei meine alten Smarten Heizkörperthermostate nach und nach durch Eve Thermo zu ersetzen, damit ich alle SmartHome-Geräte in HomeKit integriert habe.Ich kenne es von meinen bisherigen Thermostaten, dass der hinterlegte Zeitplan greift, wenn die gewünschte Raumthemperatur nicht erzeilt wurde.
Nun ist es so, dass ich bspw. in meinem heimischen Büro von 07:00 - 16:00 Uhr 21,5 Grad haben möchte. Leider hat es seit Anbindung des Zeitplans (05.10.2022) nicht einmal geklappt, obwohl der Zeitplan auf "EIN" steht. Der Zeitplan greift immer erst, wenn ich einen anderen Zeitplan auswähle, die App schließe und dann den Zeitplan für mein Büro wieder einstelle.
In der alten Wohnung (drei Zimmer, alles auf einer Ebene) habe ich Thread als sehr zuverlässig empfunden und die Kommunikation zwischen Apple Home und Nanoleaf lief sehr gut. Das war der Grund warum ich mich für die Eve Thermos beim Umzug in ein Haus mit mehreren Etagen zu entscheiden, in der Hoffnung, dass Thread Netzwerk in weiter auszubauen und noch stabiler zu machen.
Wir haben aktuell drei Eve Thermo, ein HomePod Mini, ein iPad als zusätzliche Bridge, zwei Nanoleaf Shapes und zwei Nanoleaf Bulbs (ebenfalls mit Thread aktiviert) und ein Nanoleaf LightStrip mit aktiven Thread um die Verbindung in einem dreistöckigen Gebäude möglichst stabil zu halten.
Wenn ich nun in der Eve App mit mein Thread Netzwerk ansehe, werden hier weder die Nanoleaf Threads noch der HP Mini angezeigt. Nun ist mein Büro im Dachgeschoss und die anderen beiden Eve Thermos sind im EG im Wohnzimmer. Kann es hierdurch zu dem Problem führen, dass ich den Eve Thermo immer wieder einen neuen Zeitplan zuweisen muss, weil das Thread Netzwerk nicht stabil genug ist?
Vielleicht hat hier jemand ähnliche Erfahrungen gemacht und kann mir einen Tipp geben wie ich Eve bzw. Apple Home dazu bekomme sich an die hinterlegten Zeitpläne zu halten. Weil sonst bringen mir die Eve Thermos leider nicht viel und bleibe dann doch lieber bei der DECT-Technik, auch wenn diese nicht ohne Homebridge an Apple Home gekoppelt sind.
Vielen Dank!
- Reply
Hallo Debby, bitte öffnen Sie ein Ticket in unserem Support-Systemhttps://www.evehome.com/de/support/ticket
Das Blog ist nicht der ideale Platz für trouble shooting. Danke und viele Grüße, Volker
- Reply
Bonjour, mon système Homekit fonctionne avec un nouvel apple tv 4k et 6 eve thermo ( compatible thread) et pourtant les connexions se font en Bluetooth et non en thread. Je ne comprends pas pourquoi cela ne fonctionne pas comme il devrait... Que dois-je faire pour activer le mode thread ?- Reply
Bei Verwendung von Apple TV 4K 2021, muss diese immer aktiv sein, oder funktioniert sie auch im Ruhezustand. D.h. muss ich das Apple TV permanent eingeschaltet lassen, oder kann es nach definierte Zeit in den Ruhezustand ohne die Kommunikation der Thread Geräte zu behindern?- Reply
Hallo Luigi! Laut Apple muss es nur stromverbunden sein. Ich habe meine Apple TV 4K immer auf Kein Ruhezustand, es geht aber auch ohne. Viele Grüße, Volker- Reply
Ich habe viele Eve Geräte die mit einem Aktuellen Apple TV verbunden sind der Thread Kompatibel ist. Aber nicht alle Eve Geräte funken über Thread. Wenn jetzt das Apple TV das Matter Update bekommt. kann ich dan auch über diesen auch die nicht Thread Geräte von Eve über z.B den Google Assistenten steuern.- Reply
Hallo Daniel! Nur Thread-fähige Eve-Geräte können/werden ein Firmware-Update auf Matter bekommen. Viele Grüße, Volker- Reply
Danke, für die Antwort. Aber wird das AppleTV an sich was ja schon Thread Supportet auch Matter unterstützen- Reply
Das wäre eine gute Frage für Apple - aber ja, es wird. Viele Grüße, Volker- Reply
I have two home pod minis, I only see one in the thread application on the eve app. Do they connect automatically with each other to expand the network? Thank you- Reply
Hello Anthony! Both HomePod mini should show up in Thread Network as Apple Thread Router in Unknown Room. I would reset the one HomePod mini and add it from scratch. Best regards, Volker- Reply
Hi - I am in the UK and have 5 Eve energy sockets (thread). I have no thread router yet, so have to go into the app and allow it to grab the usage stats, for each socket, when I remember.If I add a HomePod mini to enable thread, do the stats get logged automatically, or do I still need to go into each socket to allow them to update.
And - is there an API to download my stats automatically so I can set up my own automated reports etc.
- Reply
Hello Steve! Getting the historical data won't change with using a home hub, only difference is you may even get them when remote. You always need to open the accessory in Eve. HomeKit does not allow to do this in background, sorry.HomeKit enabled accessories don't provide an API for users due to security reasons, sorry.
Best regards, Volker
- Reply
Thanks Volker, at least being able to grab without being in Bluetooth range is quite useful.- Reply
I was looking for a thread enabled motion sensor and looked at Eve. I was just about to buy then I realised it had no Temperature sensor. Any chance of including one in the future? Would help to make my smart home less cluttered. Thanks.- Reply
Hello Jim! Eve Motion does not include a temperature sensor sorry. And we don't have any plan to integrate one in a next generation. I wish you e great weekend, Volker- Reply
I bought the eve door sensor and that’s the worst product. I have HomePod Mini and the thread is always disabled in the sensor, the HomePod is beside but only the Bluetooth is active. Every 2 days I have to reset it because it decide to stop work. I’m returning it.- Reply
Hello Anderson! This is a range issue. Please open a ticket in our support system, we'll help.https://www.evehome.com/en/support/ticket
Best regards, Volker
- Reply
Hi, first I have to say that Thread is great. Especially the range has been very very good. We have several Eve Energy plugs in use and one is installed in the garage about 15 meters away from the house. It still connects perfectly. I wonder how well this keeps on working in the coming years. The early days of wifi, I had a range of almost 50 meters from the house - that is impossible these days.Questions: About the Eve Energy 4th generation: when its in Thread mode, could it be made possible that it also can function as a bluetooth hub for Eve Energy 3th generation or Eve Smoke 1st generation? This would be a more efficient option than using an Eve Extend.
Also... currently Eve Smoke is missing a test function: while you can test the audible alarm, there's no Homekit trigger from that to fully test automation as well. Can you add this in the future?
- Reply
Hello pbe! Thread enabled accessories can only connect/relay Thread accessories, not Bluetooth enabled, sorry. Eve Smoke has a test alarm, the real alarm can't be triggered. Best regards, Volker- Reply
Hi, I am waiting for Eve Motion with Thread, which was supposed to be available in June 2022. Do you have any update on when Eve Motion with Thread will be available? Thank you- Reply
Hello Jozef! Won't be that long we just like to ask for some patience. Best regards, Volker- Reply
Thank you Volker. I appreciate your response.- Reply
When is Eve Motion coming out with Thread? It has been more than a year. Now is June 2022...- Reply
Hello Gordon, it won't be that long. Best regards, Volker- Reply
Mon Eve extend est défectueux mon raccord d’alimentation est brisé. Il était installé dans mon cabanon qui est à 60 pieds de ma maison donc maintenant tout mes accessoires ne réponde plus. Je regarde pour le remplacer et il n’est pas disponible nul part.- Reply
Merci de contacter le support technique : https://www.evehome.com/fr/support/ticket- Reply
HiI first bought the Eve Aqua and I’m running with schedules to water my garden. It works well. Now I bought the home pod mini and I want to get Thread to work between the Eve Aqua and the home pod mini. But I cannot get it to work. As I read, it should happen automatically. There are no options I see on enabling connection or something similar. But in the Eve App I can only see the Eve Aqua. The home pod mini works fine with Bluetooth from my phone, but it doesn’t come up on the Eve App. The two devices are less than 5 m away from each other, and both are very close to my wifi router. What should I do? Thanks!!!
- Reply
Hello Alvaro! If it is the actual model of Eve Aqua it should automatically use Thread to communicate with the HomePod mini. Nothing to set here.Please check: In the app Eve
Settings > Thread Network
After opening, wait 1-2 minutes with the screenshot until Eve has analysed the Thread network.
In case the result is not as expected, please open a ticket in our support system: https://www.evehome.com/en/support/ticket
Best regards, Volker
- Reply
Hallo,ich habe nochmal eine Frage. Ich verwende einen homdpod mini mit nanoleaf lichter und eve produkte. Da homepod mini ein border router ist, wollte ich ein selbstgebautes gerät zum netzwerk hinzufügen. Leider kann ich weder die networkkey noch die eui64 und passphrase von homepod mini herausfinden. Gibt es dazu einen weg ich das erreichen kann?
VG
Dongha
- Reply
Hallo Tonga! das ist uns leider nicht bekannt, sorry. Viele Grüße, Volker- Reply
Hallo Volker,weiß man schon, ob es in Bälde eine Eve-Button mit Thread geben wird?
LG und danke, Johannes
- Reply
Hallo Jo! Darüber habe ich leider keine Information, sorry. Viele Grüße, Volker- Reply
When will the Eve Energy AU get Thread support? Seems very odd to discontinue the Eve Extend without having any products in the country that can actually act as an extended. Disappointing.- Reply
Hello Paul! Thank you for contacting Eve Systems and your interest in our Eve Energy (AU). The current generation of Eve Energy (AU) is not ready for Thread. We will be releasing new hardware generations of many Eve devices with Thread support within the next months, but unfortunately can't give any further details on when this will be the case for Eve Energy (AU) at this time.Here's a list of all the currently available Thread-enabled Eve accessories:
https://www.evehome.com/en/identify-your-eve-accessory
Best regards, Volker
- Reply
Hallo, ist es möglich oder zukünftig geplant, dass man einen Room (Thread) als Temperatursensor für Thermo (Thread) konfigurieren kann? Mit Thread ist es ja möglich, dass die Geräte auch untereinander kommunizieren.Grüße, Chris
- Reply
Hallo Chris, Eve Thermo lässt sich nicht durch Raum-Thermostate oder externe Sensoren steuern, sorry. Viele Grüße, Volker- Reply
Das lässt sich mit zwei Regeln erreichen. z.B.Wenn ROOM ist größer/gleich 19,5C aktiviere Szene „kühler“
[kühler]
Temperatur Zielwert = 19C, Modus = EIN, Zeitplan = AUS
Wenn ROOM ist kleiner/gleich 19C aktivere Szene „wärmer“
[wärmer]
Modus = EIN, Zeitplan = EIN
Wenn in Thermo im Zeitplan 20C eingetragen sind wird die Temperatur erhöht sobald ROOM 19C misst.
- Reply
Hallo Sebastian! Naja, das mag als Krücke gehen, ist aber nicht wirklich notwendig. Viele Grüße, Volker- Reply
Hallo Volker, ich stimme dir zu, dass es sich bei Sebastian seiner Lösung um eine Krücke handelt. In meinem Fall (großer Raum, undichte Fenster) wäre ein externer Temperatursensor allerdings unbedingt nötig. Muss zur Zeit bei den stark wechselnden Tempersturen oft mehrmals pro Woche die Zieltemperatur anpassen um eine halbwegs konstante Raumtemperatur zu erhalten.