Product Features | Eve Thermo

All features of Eve Thermo

Sep 20, 2022 - by Lars - Comments
 
 

The multi award-winning Eve Thermo smart radiator valve is quick and easy to install and set up. And with a bit of fine-tuning, it can unleash all the convenience that connected heating has to offer. Read on for a detailed overview of all the functions Eve Thermo offers. 

 

Now supports Thread

The fourth generation of Eve Thermo, which is available since autumn 2020, now also supports Thread along with Bluetooth. Eve Thermo joins your Thread network automatically, which makes  your smart home network more responsive and robust, plus it increases its reach. 

 

Thread accessories don’t need a proprietary bridge to communicate with each other – they simply need a Border Router, which for HomeKit over Thread is HomePod mini or the new Apple TV 4K. Battery-operated Thread accessories, such as Eve Thermo, represent endpoints in your Thread network. Discover all you need to know about HomeKit over Thread here. 

 

You can add Thread support to your latest-generation Eve Thermo simply by updating the accessory’s firmware. Discover if your Eve Thermo can support Thread by visiting evehome.com/identify. Installing the firmware is simply a matter of opening the Eve app and tapping Accessories > [Eve Thermo]. 

 

 

Heating via an app, touch controls and Siri 

You can control your heating using the Eve and Home apps or simply ask Siri to make your room warmer, set it at a specific temperature or stop heating. 

 

Siri control 

 

  • for your whole home: "Hey Siri, set the temperature to 21 degrees."
  • room by room:  "Hey Siri, set the bathroom to 23 degrees."
  • within a zone: "Hey Siri, set the temperature in the first floor to 21 degrees."
  • as part of a scene: "Hey Siri, good night!" 

 

 

Plus, you also enjoy granular control of your heating in increments of 0.5°C on the smart radiator valve itself. 

Scheduled heating designed around you

Eve Thermo is built around schedules, which are a really simple and effective way to control your Eve accessories. They’re also a breeze to create using the Eve app – and once you’ve done that, they’re stored automatically on your Eve Thermo so your accessory can set about controlling your heating completely autonomously and all independently of your iPhone and an internet connection. 

Each room in your home requires a different temperature, and even that temperature should change to suit the time of day: You want it nice and warm in your bathroom early in the morning, followed by your living room a little later on as well as in the evening. Your bedroom should be set to a constant 17 degrees. Plus, you may also want to take into account that you like to doze under the duvet for that bit longer on Sundays and that the kids arrive home earlier on Thursdays. Sounds complicated, right? Well, using schedules means you’ll get everything fine-tuned to suit your routine in a flash. 

 

You can create a custom schedule for each room in the Eve app, plus you can set the comfort and economy temperature for the room in question. You can then configure the various schedules for workdays and the weekend, or individually for each day – or even for all days. Each schedule offers 3 heating phases such as mornings, afternoons, and evenings. 

 

The "Days Off Calendar" function accesses a calendar chosen by you on your iPhone (such as "Holidays") and ensures that the weekend schedule is run on days which are public holidays – all without you having to lift a single finger. 

 

By the way: Even if a schedule is active, you can still adjust it via the app, Siri or manually on the accessory itself. This setting is then changed with the next scheduled temperature change.

Heating depending on if you’re leaving or arriving at home

Life doesn’t always go exactly according to plan, so to cover all of life’s little eventualities you’re best off controlling your heating using a combination of schedules and location control. At all times, you remain in full control, and your privacy continues to be protected to the highest standards.

 

To control your heating based on location, you need a home hub (HomePod mini, HomePod or Apple TV). This enables HomeKit to determine if everyone has left home without anyone’s location constantly being tracked, recorded, or possibly even shared. Since only the technology baked into iOS is used for this function, it saves your iPhone’s battery and also ensures a profile of your movements cannot be created – not by Eve, by Apple, nor by any other unscrupulous individual who may have gotten hold of your information through a data leak. Your and your family members’ location is always determined based on the particular device set under "Find My" in the Apple ID settings.

 

Location-based heating is a breeze to set up for Eve Thermo in the Automation area of the Eve app. Go to Rooms, choose Eve Thermo and Automation. There you can also choose whether to suspend schedules when nobody is home. You can also set the temperature you want maintained while your home is vacant.

When you turn on this option, the schedule will only be resumed once the first family member arrives home – meaning that when nobody’s home, your set temperature will be maintained to prevent your home cooling down too much.

If you choose not to suspend schedules, the temperature will be lowered as soon as the last person leaves home. However, the next heating phase will still be activated even if your home is vacant. This way you can be sure that your heating will be lowered even if everyone leaves home earlier than usual, yet you will still return home to a nice warm place that’s been pre-heated for you.

If you don’t want to use any schedules, you can rely exclusively on controlling your heating based on the location of all family members. With this, your heating will spring into action as soon as anyone arrives home – perfect if the room heats up again quickly or you don’t need it to be at your desired temperature immediately when you get home.

Eve Thermo in the Eve app

You can dive into Eve Thermo’s details view either by tapping the Rooms view in the Eve app or by long-pressing (or using 3D touch, if your device supports it) the particular accessory’s icon in the At a Glance view. Besides the accessory settings, the details view is the main dialog for controlling your smart radiator valve. It is divided into the General section, Target Temperature, Mode and Schedule.

 

General:
Tapping the small arrow on the right opens the advanced view, which includes a battery status indicator, an accessory settings icon and the identify button, which when tapped will display a “Hi” on the Eve Thermo in question. The latter is handy if you own several smart radiator valves and you want to make sure you’re in front of the right accessory when changing the batteries.  

Target Temperature: 
The central field of the detail view shows the current target temperature, which is the room temperature you want Eve Thermo to reach. Use the up/down buttons to adjust this value in 0.5 °C increments. 

 

The measured temperature currently measured by the accessory can be seen on the left above the graph in the form of a thermometer/heater icon. HomeKit treats the sensor in question just like a stand-alone temperature sensor or that of a wall-mounted thermostat or air conditioner. Siri and the display in the Home and Eve apps display this value as measured. Any configured temperature offset (see below) is not included in the calculation by the accessory or app. Discrepancies between the actual and target temperature during heating are normal, as factors such as the sensor being located on the radiator instead of in the center of the room (and also the configured temperature offset), the 10-minute measurement interval and the smart radiator valve’s control algorithm play a role here. If, for instance, you want to heat up a room again that has cooled down, the temperature measured at the radiator’s fully-opened valve will initially be significantly higher than the target and actual room temperature – and don’t forget that the same temperature will be displayed for 10 minutes until it’s refreshed.

 

A yellow radiator icon will also be displayed above the graph when Eve Thermo is currently heating. You will see a stopwatch next to the target temperature button when a schedule is active (any manual setting will only last until this particular schedule is due to start again).

 

The graph will show a timeline with the progressions for the measured  (gray) and target temperatures (blue). Daily highs and lows as well as the last measured temperature will be marked with dots. Tapping the small info icon will allow you to view the graph by hour, week or month. Additionally, you can stop the target temperature from being displayed in the graph, deactivate Graph Line Smoothing and access temperature readings in the list view.  

Mode: 
The Mode section lets you disable Eve Thermo’s heating function. The mode returns to On if you enter anything via the accessory’s touch controls or use Siri, automations or the Home app to trigger changes. However, please note that even when in the Off mode, valve descaling cycles, and a certain amount of noise in connection with that, will continue. The temperature will also continue to be measured. If radiator valves are grouped, switching off one accessory will not affect the others.

 

Schedule: 
The current schedule stored on the accessory is displayed in the bottom-most section. It can be deactivated permanently via the On/Off button – and will stay deactivated even after the next heating phase is reached. Tapping the gear icon will take you to the schedule section with the schedules contained in the Eve app and those added by you. You’ll find an info icon next to the latter, which you can tap to bring up the schedule editor.

 

Settings

You’ll find all the key functions, some of which you’ll have already seen during the initial setup, in the settings for Eve Thermo (Eve > Settings > [Room] > [Eve Thermo]). Starting from the top.

 

Room: This is where you’ll find the room you assigned your Eve Thermo to during installation. You can change it at any time. 

 

Name: This is the Siri name you set during the initial setup. Although entirely optional, a meaningful Siri name such as “Living Room Heating” can make controlling Eve Thermo with your voice a lot easier. 

Installation: Here you can see if Eve Thermo has been installed correctly (OK). If you want to use your accessory on a different radiator in your home, but want to keep the data, tap Installation >  Remove. You can now remove Eve Thermo and calibrate it at its new location. If you ended up installing the display upside down, you can change its orientation here.

 

Temperature Offset: As Eve Thermo connects right next to the radiator, which is often located under a windowsill, the values measured may deviate from the actual temperature in the center of the room. To compensate, you can configure a temperature offset which Eve Thermo factors in when controlling the valve. If the room temperature is lower than the measured temperature shown in the app, set the temperature offset to a negative value. For example, if your lounge is 20 °C, but Eve Thermo reports 21.5 °C, set the temperature offset to -1.5 °C. Over time, you’ll need to work towards finding the ideal temperature offset that works for the particular room.

 

Window Detection: If you use Eve Door & Window on a window in the room where you’re also using Eve Thermo, Eve can automatically stop heating if the window is opened for ventilation purposes. It then resumes heating once the window is shut. This type of automation requires Apple TV or a HomePod as a home hub.
Window Detection is smart: If you forget to shut the window, heating resumes automatically after 30 minutes to prevent the building from cooling down. However, you can adjust this value to suit. 

Eve Thermo detects rapid drops in temperature even without a wireless contact sensor, however it’s less precise than when used in conjunction with Eve Door & Window. In this mode Eve Thermo continues to heat again after 10 minutes. 

 

Vacation Mode: About to take a long vacation? To avoid having to adjust each radiator individually or add a different schedule, you can simply activate Vacation Mode. It’ll suspend your schedules, hold the energy-saving temperature you’ve set and prevent your home from freezing up. Here you can set whether the Eve Thermo in question should be part of the vacation scene and the temperature you want maintained. Once you’re back from vacation, simply activate the Back from Vacation scene and everything will return to normal. .

Valve Protection: Eve Thermo will open the valve fully every three weeks to prevent scale buildup. If you trigger this function manually, Eve Thermo will remember when you did so and resume automatic valve protection three weeks from that time of the day. 

 

Temperature Unit: Choose between Celsius and Fahrenheit. 

 

Child Lock: To prevent unwanted temperature adjustments, activate Child Lock to disable the touch controls of Eve Thermo. 

 

ID: Tapping ID will display Hi on the Eve Thermo in question. It’s really handy if you want to identify a particular Eve Thermo accessory.

 

Remove Accessory: This command lets you remove a particular Eve Thermo accessory from your HomeKit configuration. You may want to do this if you intend to relocate your accessory to a different home.

 

Assigned to (optional): If you have assigned Eve Thermo to an Eve Extend range extender, it will also appear here in the settings. 

No bridge or starter set required.

Eve Thermo works right out of the box, eliminating the need for additional accessories. Schedules are stored directly on the accessory itself, so they’re always executed without the involvement of any other devices. For automations (such as heating based on if you’re at home or away, or window detection in conjunction with Eve Door & Window), you’ll need a HomePod, HomePod mini or Apple TV as a home hub.

 

Increase the reach of your devices 

With a HomePod mini or the new Apple TV 4K in your home, your latest-generation Thread-enabled Eve Thermo can communicate over the Thread mesh network, reaching even the farthest corners of your abode. This happens automatically without you needing to configure anything. A Full Thread Device, such as Eve EnergyEve Light Switch or Eve Water Guard, can act as a router node and relay data packets from other Thread products, such as Eve Thermo. 

 

To view the structure of your Thread network and see where you can make improvements, simply go to the Settings area of the Eve app and tap Thread Network. Among other things, you’ll be able to tell which nodes your Thread devices use to communicate and whether you can further improve the stability and reach of your network and devices by adding one more Full Thread Device or moving one to a better location.

Learn here how to install Eve Thermo 

Smart Radiator Valve
Learn more

Requires iPhone or iPad with the latest version of iOS/iPadOS

 
HomeKit, supports Thread
Add to cart
Your choice
Add to cart
incl. VAT, plus shipping
Your choice
Select your country
Wireless Contact Sensor
Learn more

Requires iOS/iPadOS 16.4 (or later) / Android™ 8.1 (or later), Matter controller / Thread Border Router

 
Supports Matter & Thread
Add to cart
Your choice
Add to cart
incl. VAT, plus shipping
Your choice
Choose your country
487 Comments
Hello Mark! This is done by the Eve Thermo every 10 Minutes and can't be set by the user, sorry. Best regards, Volker
Reply
Mar 16, 2022
Keola
Hallo, Ich habe mir zwei Eve Thermo gekauft und in der Eve App hinzugefügt. In der Home App sind sie dann automatisch aufgetaucht, de Icons sind jedoch grau. Wenn ich darauf klicke steht dort „In der App des Herstellers kannst du „Home“ Zugriff auf dieses Gerät geben. Wo geht das? Ich habe nichts gefunden. In den Einstellungen meines iPads habe ich in den Datenschutzeinstellungen -> Homekit den Zugriff für die Eve App erlaubt. Ich stehe auf dem Schlauch. Kann mir jemand helfen? Ich habe kein Homepod oder Apple TV. Danke, Keola
Reply
Mar 14, 2022
Hallo Keola, nach dem Hinzufügen in der App Eve müssen Sie Eve Thermo in Eve kalibrieren, sonst ist das Gerät nicht fertig eingeriechtet. Danach läuft es auch in Home von Apple. Viele Grüße, Volker
Reply
Mar 15, 2022
Peter
Hallo Eve Team,
ich würde gerne meine Thermostate in Abhängigkeit der Außentemperatur steuern, dies in Abhängigkeit von 2 Thermometern. Auf der Eingangsseite Südost bekomme ich morgens/vormittags leicht +12 Grad, auf der anderen Gebäudeseite Nordost habe ich aber dann deutlich unter 12 Grad und umgekehrt. Nun habe ich auf beiden Seiten ein Außenthermometer und möchte die Thermostate so steuern, dass wenn auf beiden Thermometern mindestens 12 Grad erreicht werden die Thermostate ausgeschaltet werden bzw. bei unter 12 Grad eingeschaltet werden. Bitte um eine Anleitung wie man die Automation erstellt wird. Meine bisherigen Versuche in der Eve App haben sich dann in die HomeApp übertragen und dort wurde nur ein Thermometer berücksichtigt und hat damit leidere nur die Messwerte eine Thermometers berücksichtigt. Die Automation soll aber beide Thermometer berücksichtigen.
Danke Peter
Reply
Feb 24, 2022
Hallo Peter! Die Schaltung macht in meinen Augen keinen Sinn aber Sie können das mit mehreren Regeln wohl lösen. Die zwei Thermometer müssen natürlich HomeKit-fähig sein. Auslöser wäre dann für eine der Regeln Temperatur (Thermometer1) >= 12C und die Bedingung Temperatur (Thermometer2) >= 12C und die Szene Modus Eve Thermo Aus. Das Ganze dann nochmal umgekehrt, damit in beiden Fällen geprüft wird. Dann benötigten Sie noch zwei Regelpaare für den umgekehrten Weg also etwa Temperatur >=15 Grad. Wie gesagt, macht keinen Sinn für mich, aber.
Viele Grüße,
Volker
Reply
Feb 25, 2022
Dirk
Hi Volker, I really appreciate all your comments regarding the offset temperature.
Isn‘t it very clear by all the requests that this feature is mostly useless?
It doesn’t work as expected for temperature read out, it doesn’t work nicely with Siri (for offsets). In my situation a possible offset is not even a constant but varying according to different other conditions.
Please make it very clear to your product management that Eve Thermo needs to work with an external thermometer.
Kind regards, Dirk
Reply
Feb 7, 2022
Aaron
Is there a timeline for bringing the Eve Thermo to the US? We have cast iron boilers in our house and this looks like an ideal solution for zone heat in bedrooms.

We’ve been impressed with the Eve Energy units.
Reply
Feb 3, 2022
Hello Aaron! Sorry, but we don't plan to bring Eve Thermo to the US. Even with cast iron boilers this won't work as we use special adapters for the valves in Europe. Best regards, Volker
Reply
Feb 4, 2022
Markus
Hallo zusammen,
ich habe nun seit einigen Wochen Eve Thermos (x6) gepaart mit Door & Window (x4), 2 Eve Energy als Router und einen HomePod mini als Steuerungszentrale.
Alle Komponenten laufen auf der aktuellsten Firmware Version und sind THREAD fähig.
Die Eve App zeigt alle Komponenten im THREAD Modus und alle Geräte sind erreichbar im Netzwerk.
Nun zu meinem Problem.
Ich benutze die Kombination von Thermo und Door&Window in 4 Zimmern um bei geöffnetem Fenster die Heizung auszuschalten und bei schließen des Fensters wieder in den Heizmodus (nach Heizplan) zurückzukehren. Diese Funktion habe ich über die "Fenstererkennung" in der Eve-App aktiviert.
In einem Raum, dem Badezimmer, ist es so, dass diese Funktion nicht immer ausgeführt wird.
Ich öffne das Fenster, das Fenster wird auch als Offen erkannt, das Thermostat bleibt allerdings im Heizen Modus... erhält also nicht die Information/ den Befehl, das Heizen einzustellen.
Zum Zeitpunkt des Fehlers ist über die Eve App kein Fehler erkennbar. Alle Geräte sind erreichbar, die THREAD Informationen deuten nicht auf ein Kommunikationsproblem hin.
Beim ersten auftreten des Problems habe ich sowohl das Door&Window als auch das Thermo zurückgesetzt und neu ins HomeKit eingebunden. Seither hat es wieder funktioniert.
Heute jedoch funktioniert die Automation im Badezimmer wieder nicht mehr.
Kennt jemand dieses Problem?
Hat jemand einen Rat für mich, wie ich dieses Thema lösen kann?
Vielen Dank im Voraus.
Gruß Markus
Reply
Feb 3, 2022
Hallo Markus! Bitte öffnen Sie ein Ticket in unserem Support-System:
https://www.evehome.com/de/support/ticket
Viele Grüße, Volker
Reply
Feb 4, 2022
Hallo zusammen,
nachdem ich das Ticket eröffnet hatte, hatte man mir geraten, die Fenstererkennung für etwa 10 Minuten zu deaktivieren und dann wieder einzuschalten.
Es sah so aus, als ob dieser Tipp geholfen hätte.
Allerdings hatte ich jetzt kürzlich wieder das gleiche Problem, zum einen wieder im Bad und zusätzlich in einem anderen Zimmer. Diesmal, keine Ahnung warum, habe ich einfach meine Steuerzentrale, den HomePod mini, Neugestartet.
Nachdem dieser dann neu aufgestauten war und alle Geräte wieder erreichbar waren, funktioniert die Steuerungsfunktion der beiden Thermostate wieder wie gewünscht.
Somit schein das Problem in irgendeiner Weise mit dem HomePod mini zusammenzuhängen.
Ich kann es nicht beschwören, aber bei ersten auftreten des Problems hatte ich in meiner Verzweiflung den HomePod mini ebenfalls neu gestartet. Somit war damals die Fehlerbehebung nicht das deaktivieren der Fenstererkennung, sondern wahrscheinlich ebenfalls der Neustart des HomePod Minis.
Ich werde das Thema weiterhin beobachten. Falls dies nun immer wieder auftreten sollte, werden ich den HomePod über eine Eve Energy per Zeitplan regelmässig Neustarten lassen
Viele Grüße, Markus
Reply
Feb 27, 2022
Oliver
Guten Tag, meine Installation, mehrere Räume und die jeweils zugehörigen Fenster mit Eve Thermo + Door&Window funktioniert bis auf ein Detail gut:
Die Absenktemperatur in den Kinderzimmern ist auf 16.5 Grad eingestellt, die Komforttemperatur auf 21.5 Grad.
Die Temperatur an den Thermostaten im Kinderzimmer erreicht und hält die Komforttemperatur gut und zuverlässig. Jedoch sinkt die Temperatur in der Absenkzeit nicht unter 18.5 Grad (auch wenn die Außentemperatur es hergibt). Die Thermostate öffnen leicht und halten so diese 18.5 Grad konstant.
Der Korrekturwert steht auf -1.5. die Komforttemperatur wird wie beschrieben gut und exakt gehalten.
Weshalb lässt Eve Thermo das Absenken auf 16.5 Grad in diesen Räumen nicht zu?
In einem anderen Raum (Hauswirtschaftsraum) ist permanent die Temperatur 16.5 Grad eingestellt. Das funktioniert tadellos. An der Temperatur selbst, also dass sie technisch nicht möglich ist., liegt es also nicht.
Reply
Feb 2, 2022
Hallo Oliver! Wenn die Raumtemperatur (gemessen in Raummitte) nicht unter 18,5 Grad sinkt, ist der Raum vermutlich so gut isoliert, dass in der Phase der Eco-Temperatur diese nicht so schnell sinkt. Viele Grüße, Volker
Reply
Feb 2, 2022
Hallo Volker,
vielen Dank für die schnelle Antwort! Zwar ist das Haus vernünftig, wenngleich nicht super isoliert (verklinkerter Bau, 1991), dennoch vermute ich eher, dass die sich leicht öffnenden Thermostate (kann in der Zeitleiste gut nachvollzogen werden) die Temperatur halten. Eine mir bisher nicht bekannte Grundeinstellung ist das aber nicht, oder habe ich da etwas übersehen?
Reply
Feb 2, 2022
Hallo Oliver! Nur nochmal zur Sicherheit: Die Zieltemperatur soll in Raummitte erreicht werden, gemessen mit einem externen Thermometer. Die von Eve Thermo direkt am Heizkörper gemessene ist nicht relevant nach der Ermittlung und Einstellung der Temperaturabweichung. Viele Grüße, Volker
Reply
Feb 3, 2022
David
Kann man das Thermostat auch irgendwie per Touch-Bedienfeld komplett abschalten (z.B. wenn man das Fenster öffnet)? Ich habe durch probieren herausgefunden, dass man den Frostschutz aktiviert, wenn man beide Tasten gleichzeitig drückt, aber wie man es abschaltet habe ich noch nicht herausgefunden. Leider gibt es zum Touchfeld keine Anleitung von Eve oder ich habe sie nicht gefunden. Lediglich die Tabelle mit den Codes konnte ich finden, wodurch ich weiß, dass es einen Frostschutz- und einen Pausieren-Modus gibt. Über die App ist mir das zu umständlich im Moment und an jedem Fenster möchte ich jetzt auch nicht einen Sensor anbringen (und im Bad geht es auch nicht, da das Fenster direkt an der Badewanne/Dusche ist und regelmäßig Nass wird).
Reply
Jan 31, 2022
Jo
Hallo :-)
Kann ich Siri abends sagen „Heize das Bad morgen um 7 Uhr auf 25 Grad“ und das funktioniert dann auch? Oder geht das ausschließlich über den Zeitplan?
Liebe Grüße!
Reply
Jan 29, 2022
Hallo Jo! Das kann Siri leider (noch) nicht, wäre aber klasse. Zeitplan ist eine gute Option. Viele Grüße, Volker
Reply
Jan 29, 2022
Chris
Hi team!
I’ve bought my first eve thermo for the bathroom and love it! But there one thing I’d like to do and can’t figure out how?
I’d like to have a kind of boost function. Where if it’s particularly cold I can press boost and it will override the schedule and then the heater comes on for full blast for an hour. Once the hour is complete it then goes back to the schedule.
I thought of Siri Shortcuts to do this but don’t see any shortcuts for the Eve thermo. Then thought about scenes but also can’t see how this could work.
Is there a way for such a function? If not might I suggest it for the future. Thank you!
Reply
Jan 22, 2022
Hello Chris! Eve Thermo does not have a boost function. The thermostats controlls the heater to minmize the use of energy. Sorry, but there are no Siro shortcuts for Eve Thermo, not provided by Apple's app. Best regards, Volker
Reply
Jan 22, 2022
Stephan S.
Hallo,
mir ist aktuell aufgefallen, dass eine Temperaturerhöhung zB. am Morgen über Siri oder auch durch Eingabe in der App nicht bei der nächsten Statusänderung im Zeitplan zurückgesetzt wird sondern ziemlich genau nach sechs Stunden. Ist dies in der Programmierung so gewollt?
Gruß Stephan
Reply
Jan 16, 2022
Hallo Stephan! Die Änderung soll nur bei der nächsten im Zeitplan erfolgen. Grätscht hier vielleicht eine der Automationen rein, etwa Fenstererkennung, Urlaubsmodus oder die anwesenheitsbasierte? Viele Grüße, Volker
Reply
Jan 16, 2022
Peter
Hallo Eve Team
wir nutzen Eve Door&Window in Kombination mit Eve Thermo. Sofern die Geräte in einem Raum sind, ist die "Fenster offen" Funktion ganz einfach zu aktivieren und funktioniert sehr gut (Hierbei wird in der Apple HomeApp die Szene Heizung pausieren bzw. fortsetzen erzeugt).
Wie lautet bitte jedoch folgende Regel/Szenen Einstellung: Wenn im Wohnzimmer das Fenster geöffnet wird soll auch das Thermo Ventil der Heizung im Flur pausiert/gestoppt werden und natürlich auch umgekehrt, also Fenster im Wohnzimmer zu dann Thermo Ventil im Flur wieder öffnen. (Wir haben im Wohnzimmer 2 Eve Thermo, 1 Eve Door&Window, im Flur 1 Eve Thermo). Ziel ist es letztendlich das ich in der Apple HomeApp die Szenen Heizung Flur pausieren bzw. fortsetzen habe.
Danke Peter
Reply
Jan 14, 2022
Hallo peter! Hier müssten Sie komplett eine eigene Automation schreiben, der Auslöser ist das Öffnen des Eve Door & Window, die Eve Thermo dann in der Szene geregelt. Viele Grüße, Volker
Reply
Jan 15, 2022
Michael_M
Hallo, da ich mir nicht alle über 160 Kommentare durchlesen will, stelle ich meine Frage mal:
Wenn ich einen Zeitplan erstellen möchte, in dem von 7 Uhr morgens bis nächsten Tag 2 Uhr die Komforttemperatur eingestellt sein soll und von 2 Uhr bis 7 Uhr die Sparen Temperatur, lässt sich das nur durch zwei Komfort Phasen einstellen: Eine von 7 - 23.50 Uhr und eine weitere von 00.00 Uhr bis 2 Uhr.
Das bedeutet eine Heizunterbrechung von 23.50 bis 00.00 Uhr. Lässt sich das irgendwie vermeiden? Gibt es eine Möglichkeit, die Heizphase tagübergreifend zu aktivieren?
Reply
Jan 13, 2022
Hallo Michael! Der HomeKit-Tag dauert von 00:00 bis 23:59, das lässt sich also leider nicht vermeiden, sorry. Viele Grüße, Volker
Reply
Jan 13, 2022
Zoltan
Hello, I can see the accessories in eve app, but in Apple HomeKit I can control only two of four thermo valves. Some setting is missing according to Apple HomeKit, but I do not find in Eve App where I can grant access to Apple Home. Can you help me? Thanks, Zoltan
Reply
Jan 7, 2022
Hello Zoltan! Once you added Eve Thermo in the app Eve or Home, it is available in both apps to check and control. This may be a range issue: You have to be close with the iPhone if you don't use a home hub as Eve Thermo uses Bluetooth to connect then. Best regards, Volker
Reply
Jan 8, 2022
Lasse
Any plans for adding support for an external thermometer in future versions? In larger rooms or with a “hidden” heater, the offset function does not give the desired temperature
Reply
Jan 7, 2022
Hello Lasse! So far we have no plans to do so, sorry. Best regards, Volker
Reply
Jan 8, 2022
Nick
Is it possible to somehow set the offset more than -5 degrees? In my case, I use them for floor convectors, and a couple of degrees is not enough for ideal work. Is it possible to implement it somehow?
Reply
Dec 29, 2021
Hello Nick! Sorry, but this is not possible. In addition Eve Thermo won't really work with floor heaters. Best regards, Volker
Reply
Dec 30, 2021
Matthias
Hallo,

ich habe jetzt seit ca. 6 Monaten im Bad ein eve Thermo + Door and Window zur Fenstererkennung bei mir installiert, da die Kids nach dem Duschen zwar lüften, aber nie die Heizung abdrehen. Das hat im
Sommer noch 1A funktioniert (als die Heizung noch nicht lief). Jetzt haben wir Winter und Heizperiode, aber die Fenstererkennung funktioniert nicht mehr.

In der App wird sofort gemeldet ob das Fenster geöffnet oder geschlossen wird, daran liegt es also nicht. Der Fenster Sensor ist auch weiterhin noch mit dem Thermostat verknüpft, aber das Thermostat reagiert einfach nicht mehr auf die Fenstererkennung und heizt munter vor sich hin. Bei den aktuellen Gaspreisen ist das natürlich sehr ärgerlich und genau das was ich nicht wollte. Ich hatte eigentlich gehofft mich auf die Automation verlassen zu können.

Ich habe seitdem nichts mehr an der App oder der Konfiguration geändert. Woran kann es also liegen? Das einzige was sich geändert hat, ist die Version der Eve App. Wurde da eventuell ein Bug mit eingebaut?

Hat jemand eine Idee wie ich die Funktionalität wiederherstellen kann?

Grüße,
Matthias
Reply
Dec 28, 2021
Hallo, ich habe selbes Problem. Neueinrichtung, Szenen und Regeln neu und zusätzlich erzeugt hilft nicht. Es lief lange problemlos aber seit Ende vorigen Jahres erkennt er nur noch sehr selten das offene Fenster. Ich habe das Gefühl Apple Home und Eve kommen sich hier in die Quere.
Reply
Apr 13, 2022
Hallo Ronny! Eve und alle anderen HomeKit-Anwendungen von Drittanbietern (Home.app ist die einzige privilegierte) sind nur Clients, die das HomeKit-Framework und seine (öffentlichen) Funktionen verwenden. Regeln sind nichts, was in Eve "läuft", Eve ist nur die Benutzeroberfläche, um Regeln einzurichten und an HomeKit zu übergeben. Regeln werden durch einen Daemon-Prozess auf iOS/tvOS ausgeführt, der sich weit außerhalb unserer Reichweite befindet. Sie können gern ein Ticket im Support-System öffnen, für Troubleshooting ist das hier nicht der richtige Platz:
https://www.evehome.com/de/support/ticket
Viele Grüße, Volker
Reply
Apr 14, 2022
Markus
Hallo zusammen,
ich habe mehrere Thermostat in einem Raum. In HomeKit finde ich nicht die Möglichkeit diese zu gruppieren! In der EVE App (Einstellung -> Gruppe) hab ich es auch probiert. Lässt sich nicht weiter auswählen!
Wie könnte ich die Temperatur adhoc einstellen und diese wird auf alle Thermostate übertragen?
Reply
Dec 27, 2021
Hallo Markus! Wenn die Thermostate in Eve demselben Raum zugeordnet sind, werden sie automatisch gruppiert, es gibt einen Dialog beim Hinzufügen. Viele Grüße, Volker
Reply
Dec 28, 2021
Korbi
Hallo Zusammen! Hat sich etwas am Verhalten der Eve Thermos beim Ein/Ausschalten geändert?
Ursprünglich war es so, dass beim Einschalten die Temperatur wieder eingestellt wird, die vorher eingestellt war (unabhängig von dem Wert der laut Zeitplan gerade eingestellt sein sollte).
Neuerdings ist es so, dass beim Einschalten nicht mehr der alte Wert eingestellt wird, sondern der laut Zeitplan momentan gültige.
Ist diese Änderung bei allen so? Ist das so gewollt oder ein Bug?
Das hat mir einige Automationen zerschossen (z.B. Fenster auf/zu --> ursprünglicher Wert)
Viele Grüße,
Korbi
Reply
Dec 21, 2021
Hallo Korbi! Wenn Sie das Eve Thermo über Modus wieder einschalten, wird die im Zeitplan gesetzte Temperatur wieder gewählt. Ist das nicht gewollt, müssen Sie Modus und Zeitplan deaktivieren. Viele Grüße, Volker
Reply
Dec 22, 2021
Hallo Volker!
Das war aber bis vor kurzem noch anders. Da hat das erneut Einschalten nicht auf den Zeitplan geschaut, sondern die vorherige Temperatur wiederhergestellt. Auf Basis dieser Funktionalität habe ich meine Automationen aufgebaut, die ich jetzt alle ändern müsste bzw. teilweise gar nicht so leicht kann (siehe Beispiel mit kurzzeitigem Abschalten bei offenem Fenster)
Im Endeffekt ist mit der neuen Konfiguration eine Einstellungsmöglichkeit weggefallen, denn die Aktion "Zeitplan An" hatte vorher genau den Effekt, den jetzt "Modus An" hat.
Bevor ich mich daran mache alles Umzubauen nochmal die Frage, ob das momentane Verhalten der neue Standard bleibt, oder ob es sich um einen temporären "Bug" handelt?
Vielen Dank für deine Infos, viele Grüße,
Korbi
Reply
Dec 22, 2021
Hallo Korbi! Es ist kein Bug, sondern eine Änderung auf Wunsch vieler Kunden. Viele Grüße, Volker
Reply
Dec 23, 2021
Hallo Volker,
alles klar. Kannst du mir evtl. einen Tipp geben, wie sich mit dem neuem Verhalten die Änderung das beschriebene Fensteröffnen → Heizung "pausieren" / Fenster schließen → Heizung fortsetzen umsetzen lässt?
Viele Grüße,
Korbi
Reply
Dec 23, 2021
Chris
Hallo Volker, eine Frage - ich komme gut zurecht mit den Temperaturen 17/21 Grad - jedoch habe ich festgestellt, dass die Aufheizung der Räume unterschiedlich stattfindet. Wieviel Vorlauf gebt ihr der Uhrzeit für die zu erreichende Temperatur? Möchte ich ab 0800 die Raumtemperatur inkl. Offset auf 21 Grad haben, wann sollte das Programm hierfür starten?
Reply
Dec 20, 2021
Hallo Chris! Wir nutzen keine Booster-Funktion, da das unnötig Energy verschwenden würde. Ich würde 15 Minuten vorher starten, damit es dann warm ist, wie Sie es wünschen. Viele Grüße, Volker
Reply
Dec 21, 2021
Paul
Wenn ich einen Raumsensor über HomeKit in einem Raum mit Eve Thermostaten installiere, orientieren sich die Thermostate dann nach dem Raumsensor oder weiterhin nach dem integrierten Sensor?
Reply
Dec 19, 2021
Hallo Paul! Eve Thermo lässt sich weder durch Raum-Thermostate, noch durch externe Sensoren steuern. Viele Grüße, Volker
Reply
Dec 20, 2021
Hallo Volker, bei mir funktioniert das aber erstaunlicherweise wunderbar. Eve Thermo wird bei mir über Eve Room gesteuert.
Dafür musste ich nur eine Automation erstellen.
Als erstes 2 Szenen anlegen:
Szene 1:=> Eve Thermo Temperatur Zielwert => 30°C und Eve Thermo Modus EIN
Szene 2:=> Eve Thermo Temperatur Zielwert => 10°C und Eve Thermo Modus AUS
(Hier könnte man zur Visualisierung auch noch eine Lampe ein/aus-schalten)

Dann in Eve Room auf Automation und Regeln hinzufügen:
Regel 1:=> Aktiviert ein, Auslöser t <= 20.0, Bedingung keine, Szene => Szene 1
Regel 2:=> Aktiviert ein, Auslöser t >= 20.5, Bedingung keine, Szene => Szene 2

Es ließen sich auch weitere Bedingungen definieren, aber als Basis soll das mal reichen.
Ein Heizungsventil NICHT über ein Raumthermostat steuern zu können würde ich auch als riesiges Defizit ansehen. Erst die Kombination macht doch wirklich Sinn, denn die Temperatur am Ventil zu erheben und die Definition eines Offsets sind doch lediglich Krücken und führen das Konzept etwas ad absurdum.
Schön wäre, wenn man einfach das Ventil steuern könnte (auf/zu), abfragen kann man das ja, aber es geht auch so über die Zieltemperaturen als Krücke.
Ansonsten gefällt aber das Konzept, insbesondere der Aspekt des Datenschutzes (keine Cloud) haben hier den Ausschlag für EVE-Produkte gegeben.
Reply
Jan 29, 2022
Hallo Klaus! Naja, ein Regeln ist das ja nicht wirklich und besonders Energy effizient ist es zudem nicht. Beim Überschreiten wird das Vantil komplett geschlossen und beim Unterschreiten voll aufgerissen. Das geht natürlich, würden wir aber nie empfehlen, es ist eigentlich ein Ein- / Ausschalter. Viele Grüße, Volker
Reply
Jan 31, 2022
Aber dennoch hat klaus doch recht, das diese funktioniert beim erweitern des Funktionsumfangs von eve Thermo Priorität haben sollte, da es ja eigentlich nicht schwer seinen sollte die bisherigen Algorithmen auf grundlage der von eve room gemessenen Temperatur anstatt der von eve thermo laufen zu lassen. Diese gemessene Temperatur hatte an der Stelle ja schon bereits den Vorteil, das sie Offset bereinigt wäre. (Also ohne die Angabe der tenperatur Abweichung auskäme)
Reply
Jan 31, 2022
Add new comment