
Discover your Thread Network
Routers, endpoints, nodes, partitions – this article is somewhat of a more technical description of Thread, the future-proof smart home networking technology that enables a new generation in your HomeKit-enabled smart home.
Make the most of Thread
First, if you haven't already installed the Eve app, you may want do so now. We recently added a feature conveniently named "Thread Network" in the Settings section, which can survey your home's Thread network setup and display a whole slew of information: Which accessories are connected to which other accessories? How is the network laid out? What connection quality does each Router have?
Surveying your Thread network works best when you have at least one Eve accessory that can act as a Router (more on that later) and when your iPhone or iPad is on the same local network as your HomePod mini.
We are actively working on improving the Thread Network view with each new release of the Eve app, and after reading this post, you will certainly be able to understand better what that is all about. And while these are just first steps in that direction, the Eve app delivers still much more than any other tool out there due to the capabilities and integration of the state-of-the-art Eve accessories.
Our goal here is to help you build smarter homes and make your daily life a little bit more convenient. Of course all while preserving your privacy, which continues to be one of our key pillars for everything we design and produce – absolutely no information about your network ever leaves your local devices.

How did we get here?
Before digging into what Thread is, let us briefly explore the history of the topic. The two original, native connectivity options for HomeKit-enabled accessories are Wi-Fi and Bluetooth Low Energy.
Both technologies have tradeoffs: While Wi-Fi usually offers a greater range and quicker response times, these advantages go hand in hand with a very high energy demand, making it unsuitable for battery-powered devices and a bad choice even for mains-powered accessories that would waste a significant amount of energy by using this technology. And as the number of Wi-Fi devices increases in a home, some internet routers are starting to struggle with so many devices or may even run out of allocated IP address range for the home network. In contrast, Bluetooth Low Energy (BLE) is completely decoupled from the home network strain and highly energy efficient. Yet due to the protocol's constraints, Bluetooth connectivity is less responsive in larger setups and usually delivers a smaller range due to the low energy footprint.
Focusing exclusively on HomeKit-enabled accessories using native connectivity options, Eve naturally embraced both options, carefully choosing the appropriate technology for each accessory's use case. To mitigate some of the disadvantages of Bluetooth connectivity, Eve Extend was introduced to combine the advantages of both technologies for more demanding setups.
There is definitely awareness for all of these technological challenges across the industry, which sparked the development and broad support for Thread as the next-generation networking platform tailored to be used in the smart home, including Apple's strong commitment and inclusion as a pillar of HomeKit-enabled accessories.
Join us in being an early adopter
Why is Eve a first-mover on Thread you may ask? We are thrilled about all the advantages it has to offer. First, it is a peer-to-peer mesh network, which means the devices do not need a direct connection to a central hub to communicate with each other. Second, it is designed to be a self-maintaining and self-healing network, so even if some devices come and go, the connection will still be kept alive and the network will automatically reconfigure itself as needed. Third, it is designed from the ground up with the smart home in mind, which means a special focus is made on the battery life and power consumption for the devices that do not have a permanent power supply.
With Eve Door & Window, we are the first company to get a battery-powered HomeKit over Thread accessory in the hands of everyone. And this is just the beginning: we are in the process of updating our portfolio of Bluetooth-enabled accessories to include Thread connectivity in each product's new generation. So naturally, we've gathered a lot of knowledge around Thread, which we are eager to share. Enough introductory words, let's dive in!

Thread networking deep-dive
As stated earlier, Thread is a mesh network. Which means, the devices on the network can talk to each other independently of some bridge or central hub. Even more so, they can relay messages to other devices by passing them through so they reach some device otherwise inaccessible due to the range, walls, or other factors. And the network can organize itself independently if some devices disconnect from the network.
Thread Roles
The Thread network consists of two types of roles: Routers and Endpoints. And this role is not fixed – if a device is capable of routing, it can be either, depending on the current network situation and demands. Each device on a Thread network is called a node.
Let us dig deeper. Router nodes are meant to route information packets around the network. A Router node may have some Endpoints, too – the Router is considered a Parent. Mains-powered Thread accessories that are always on, such as Eve Energy, can act as Routers within your Thread network and relay data packets.

Endpoint nodes (also known as End Devices or Children) are the ones that are attached to a particular Router node and are not participating in the packet routing, but they still can send and receive. A Router-capable device can act as an Endpoint, but the devices that are meant to be Endpoint-only (also called Minimal Thread Devices), such as battery powered ones, cannot be a Router.
Each Router node has a connection to every other Router node; each Endpoint node only maintains a connection to its parent Router node.

The Thread network also has a so-called Leader node, which is responsible for promoting other capable Endpoint nodes to Router nodes and back. This is not something built-in, static or even especially important – any Router node is capable of being a Leader and these get elected in a somewhat random manner based on the current network conditions.
There is also a separate entity which is essential for Thread: A so-called Border Router. This is a Thread Router node that is also connected to your home network and that knows how to route information packets between the Thread network and the rest of your local network. Without the Border Router, your home accessories will not form a Thread network because they'd be unable to communicate with other devices outside of your Thread network, such as your iPhone. Instead, they will revert to their default Bluetooth connection (yes, all Thread-enabled accessories have dual connectivity – Thread and Bluetooth). Currently, the one and only Border Router for HomeKit over Thread is HomePod mini.

Joining the network
When a Thread-capable accessory is powered on after its setup, it will quickly check whether there is a Thread network available. If it is, the accessory will join the network with the valid network identifier and credentials provided by the Border Router. Upon joining, any Thread device becomes an Endpoint of one of the existing Routers. If it is capable of being the Router itself (in Thread terminology, this is called a Full Thread Device), it may be told by the Leader Node to upgrade itself to a Router, depending on the number of Router nodes already present in the network. If less than 16 Routers are in the network, the device will be designated as a Router. If there are already 16 Routers in the network, Thread will automatically optimize all roles for optimal coverage. A maximum of 32 Routers will ultimately form the Thread mesh network.
If the accessory is not capable of routing, it remains being an Endpoint. Still, it may change the Router node it connects to (its Parent) later, based on the connection quality that is being surveyed automatically across the Thread network.
Endpoint Characteristics
For Endpoint nodes, there is also a distinction in form of so-called Sleep Interval. Each Endpoint, depending on its physical characteristics, may be a Sleepy Endpoint or a Regular Endpoint. The idea is simple: if an accessory must by design conserve energy, it may choose to sleep for certain amount of time and then ask its Router whether there is anything of interest (similar to you having to click on the "Check Mail" button back in the days when it was not automatic). For example, Eve Door & Window has a sleep interval set to 5000 milliseconds, which means it wakes itself up every 5 seconds and asks whether there is something new for it to digest. Of course, it can wake up more often to transmit something important from its side – for example, when the door is opened. This sleep mechanism significantly helps preserving battery life.
Partitions
What happens if you have a large house and there are problems with some accessories being unable to hold a reliable connection? If you have more than one Border Router-capable device (or, in other words, more than one HomePod mini), they may form two independent Thread networks that would still be technically cover your single home. Such independent networks are called Partitions. If the connectivity gets better, the disjointed Partitions will re-unite again and form a single network Partition, with all but one Border Routers stepping down to a regular node role.

Grow your network
What about the number of devices that any single Thread network Partition can handle? It will always have one Leader node, and up to 32 Router nodes. Each Router node may have up to 511 Endpoints. So, as you can see, the total capacity of the network is quite huge and should cover most modern use cases.
Stay tuned
With all this knowledge in mind, we hope you enjoy building your Thread network and watching it grow. In the Eve app, head to "Thread Network" in the Settings section to get a look behind the curtain of your Thread network and all the different roles and connections of your Thread-enabled accessories.
We'll be adding more explainers, guides as well as articles on Eve app updates that deliver new or improved Thread functionality. The Eve Blog is the go-to place for information on HomeKit over Thread, so stay tuned!
Posts you might also be interested in.
HomeKit Over Thread With HomePod mini and Eve
A smart home without any limitations: discover how HomePod mini, Eve and Thread bring your smart home to the next level.
The home hub: An essential device for HomeKit-enabled accessories
Whether you connect to your HomeKit accessories via Wi-Fi, Bluetooth or Thread, your connected home is simply incomplete without a home hub – an Apple TV, HomePod or HomePod mini. Your home hub gives you both secure access to your accessories while you’re on the go and enables you to set up automations.
Eve – Welcome to a smart home that’s 100% private
Home is your most private space. The only place where you can do as you please, on your terms. However, if you live in a smart home, you will also produce loads of data that others will be only too keen to get their hands on. That’s why we...
- Reply
Bonjour.J'ai chez moi 2 Apple TV (une 2017 et une 2015) ainsi qu'un HomePod mini.
J'ai eu beaucoup de mal à rajouter des accessoires thread (un eve motion). Je me suis rendu compte dans l'application Maison dans la partie concentrateur que le HomePod mini était en veille et une des 2 Apple TV (non compatible thread) qui était connecté. Le problème est qu'il n'est pas possible de choisir le concentrateur actif dans l'application Maison ni même de désactiver l'Apple TV en tant que concentrateur. J'ai donc du débranché les 2 Apple TV et cela m'a permis de rajouter le eve motion.
Le problème est que lorsque je rebranche les Apple TV, il arrive qu'un des 2 se remette en concentrateur actif et par la même occasion le eve sensor non connecté.
Existe-t-il une solution pour éviter cela?
Merci d'avance.
- Reply
Bonjour. Merci de créer un ticket de support technique sur https://www.evehome.com/fr/support/ticket- Reply
Heute wollte ich im Mac App Store die Eve Home-Version für Mac OS X laden. Leider erhielt ich die Meldung "Artikel nicht verfügbar. Der angeforderte Artikel ist zur Zeit nicht im deutschen Store erhältlich."Was ist da los? Temporäres Problem oder wird die App für OS X nicht wieder verfügbar sein?
- Reply
Hallo Heiko!Eve 5 ist eine Universal-App für iPhone und iPad. Auf einem M1/M2-Mac läuft die iPad-Version von Eve 5 und wir haben sie soweit angepasst, dass die sinnvoll am Mac läuft. Das ist keine Catalyst-App, sie arbeitet also nicht an Intel-Mac. Eine Version für Intel-Macs ist aktuell nicht in Planung.
So bekommen Sie die Version Eve 5 auf Ihren M1-Mac:
1.Öffnen Sie die App Store am M1-Mac und geben oben links den Suchbegriff Eve ein.
2.Sie bekommen Fundstellen für Eve angezeigt, unsere App ist nicht dabei.
3.Unter "Ergebnisse für Eve" finden Sie zwei Reiter, Mac-Apps und iPhone & iPad Apps. Wählen Sie iPhone & iPad Apps - jetzt wird Eve angezeigt.
4.Öffnen Sie Eve Für HomeKit aus der Liste der Fundstellen und laden es.
5.Öffnen Sie Eve für HomeKit am M1-Mac, Sie können es auch permanent im Dock halten.
Viele Grüße, Volker
- Reply
Bonjour,comment réagit le réseau Thread quand 2 borders router sont sur 2 réseaux IP différents? (1 Apple TV 4K sur réseau Ethernet en 192.168.10.10 et 1 HomePod mini en réseau wifi 192.168.20.10)
- Reply
Bonjour,Cela posera des problèmes, le protocole "Bonjour" sera bloqué. N'utilisez qu'un seul réseau avec vos routeurs de bordure Thread.
- Reply
Ich habe 6 Eve Energie, 1 Eve LightSwitch, 4 Eve Thermostate, 2 Eve Bewegungssensoren über Einen der beiden ich die LightSwitch bei Dunkelheit , steuere. 1 Apple TV 4K der ersten Generation. Alle Geräte sind über 3 Stockwerke verteilt. Leider kommt es alle paar Wochen vor, dass die LightSwitch sich nicht bei Dunkelheit und Bewegung sich einschaltet. Meine bisherige Lösung: wenn es wieder einmal hackt, schalte ich die Stromsicherung im ganzen Haus für 5 Minuten aus und dann läuft es wieder für ein paar Wochen. Wo liegt der Fehler? Das kann doch kein Dauerzustand sein oder?Viele Grüße Thomas
- Reply
Hallo! Bitte öffne ein Ticket in unserem Support-System https://www.evehome.com/de/support/ticket, wir können sicher helfen. Viele Grüße, Volker- Reply
Bonjour,Je voudrais mettre une eve Aqua au fond de mon jardin, environ à 40/50 m de ma maison. Je n'ai pas la possibilité de mettre une eve Energy entre. Y a-t-il une solution pour augmenter la portée du réseau thread ?
- Reply
Bonjour. Malheureusement dans votre cas il n'y a pas de solution, la portée maximale de Thread est de 20 m sans obstacle.- Reply
Hallo, bis vor kurzem funktionierte das Thread-Netzwerk gut. Das tut es auch jetzt, aber die Anzeige in der App zeigt nur noch ein Suchen, das Netzwerk ist nicht sichtbar. Wenn ich einzelne Geräte anklicke, zeigt sich jedoch ihre Rolle im Thread-Netzwerk. Gibt es dazu eine Idee?- Reply
Hallo Ulrich! Bitte öffnen Sie ein Ticket in unserem Support-System: https://www.evehome.com/de/support/ticketDanke und viele Grüße, Volker
- Reply
I have the Apple HomePod Gen 2 on order (3 Feb delivery) and a two-pack of the Gen 4 Eve Energy devices (model 20EBU4101) that are Thread capable.I also have two Gen 1 Eve Energy devices (model 2EE304001000) and three Gen 2 Eve Energy devices (model 20EAG4101) which obviously aren't Thread capable. Will those Gen 1 and Gen 2 devices be usable and controllable via Siri on the new HomePod running v16.3 software?
And happens when I switch over to Matter? Will they still be usable?
- Reply
Hallo Felix! Only the actual model can use Thread, the old models are missing the radio for IPv6. In a complete iOS environment there is no need to update to Matter now, only when using a SmartThings Hub or Google Nest hub in the same network. Best regards, Volker- Reply
Hallo Eve-CommunityInteressante und gut verständliche Erklärung, danke.
Wie viele Schaltzentralen bzw. Border-Router fähige Geräte (Apple TV, HomePod mini) verträgt ein Thread-Netzwerk?
Nach meinem Verständnis sollte ein Thread-Netzwerk stabiler werden, wenn mehrere Schaltzentralen vorhanden sind, oder liege ich da falsch?
Zzt. stelle ich jedoch fest, dass das Thread-Netzwerk zu bröseln beginnt und nach 1-2 Tagen sogar zum Erliegen kommt (Geräte sind nicht mehr erreichbar oder verbinden sich teilweise nur noch per Bluetooth), wenn meine 8 HPmini und 2 AppleTV (verteilt über 3 Etagen) in Betrieb sind. Nehme ich alle vom Strom und schalte nur einige wieder ein und starte diese neu (z.B. 1 AppleTV und 2 HPmini) baut sich das Thread-Netzwerk wieder auf und die Geräte sind wieder wie gewohnt erreichbar.
In meinem SmartHome befinden sich ausschliesslich Eve-Geräte (alle mit Thread-Unterstützung). Alle Apple Geräte auf aktuellem Softwarestand iOS 16.2 und alle Eve-Geräte mit aktueller Firmeware).
- Reply
Hallo Ray! In der Theorie sollte das so sein. Allerdings scheint di Praxis das nicht herzugeben. Bei 10 und mehr Thread Border Routern scheinen Die das Netzwerk und Routing nicht hin zu bekommen. Ich würde wenn es geht 2-3 aus dem Thread-Netzwerk nehmen, bis Apple das problem löst. Viele Grüße, Volker- Reply
Al of my eve devices have joined the thread network except one... it it still showing bluetooth, so it typically doesn't activate the automation to turn the lights on. How can I admit to thread network. I have tried brigning- Reply
Hello Nicholas! Please open a ticket in our support system, you will find help, Thank you, Volkerhttps://www.evehome.com/en/support/ticket
- Reply
Thanks for the article, I have a network with an Apple TV 4K on 4th floor (apartment in a building) with a couple of Eve devices (e.g., LED strip) and I could manage to reach the garage (4 floors below, that is) with CPL.I now have a Door & Window sensor in the garage but of course the MPD (Door & Window) will not reach the Apple TV 4K via the Thread network.
What would be the best way to make sure I get notifications (and also so that I can setup automation) from the Door & Window sensor?
Should I buy a HomePod mini and put it in the garage...? Any better idea?
- Reply
Hello Max! Either place a powered Thread enabled accessory half way to the garage as this blog describes or a HomePod mini in the garage if you have Wi-Fi coverage there. Best regards, Volker- Reply
Bonjour,Pardonnez- une question de béotien est-il juste de penser que les appareils en thread n'utilisent pas le WIFI pour communiquer entre eux et que, ainsi, il me serait possible de brancher mon routeur sur une prise EVE et de l'éteindre et, surtout, le RALLUMER à distance avec mon iPhone ou selon une programmation?
merci d'avance pour votre aide.
- Reply
Bonjour. Les accessoires Thread (de même que les accessoires Bluetooth) n'utilisent effectivement pas de liaison Wi-Fi.Pour pouvoir avoir accès à distance aux accessoires et utiliser des automatisations, il vous faudra un concentrateur HomeKit Apple (HomePod (mini) ou Apple TV 4/4K).
- Reply
How many thread devices are optimal. I have between 2-4 per room all border routers and 2 HomePod minis and a thread capable Apple TV for a total 12. I need many new light switches 3 way and dimmer.I’m considering adding in a couple non thread light switches because a reliable 3 way, dimming thread enabled switch doesn’t seem to be available. So is there a magic number for thread devices? The article seem to maybe say it was 16 or 32
Thanks! Great article. It’s my go to to send to friends cuz my explanation seems to confuse them more 😂.
- Reply
Hello Nev! Thread Border Routers are HomePod mini and/or the Apple TV 4K (2nd generation) or the Apple TV 4K (3rd generation, Wi-Fi + Ethernet). The total should not exceed 10. Even in iOS 16 too many Thread Boder Routers will lead to problems building the Thread network. Same applies to using more than 25 powered Thread enabled accessories. This is a problem Apple has to solve. Best regards, Volker- Reply
I understand that Thread devices can "talk" to each other, but do they understand what everyone is saying? For example, can you set up a Thread presence sensor (like Eve Motion) or button (e.g. Eve Light Switch) to directly turn a Thread light bulb on or off, without going through a HomeKit or similar automation running on another device? Because with Zigbee you could do that (at least with my Philips Hue), and it would work even if the hub was off or out of range. Same for KNX: once the devices are configured, they can send simple commands to each other, and it all works, without a server. Can you do this with Thread, today?- Reply
Hello Mik! For any automation as of today you need to set up an automation involving a home hub. This involves HomeKit of cause. This does not change with Thread. Best regards, Volker- Reply
Sehr guter Beitrag, aber eine Sache ist mir noch nicht ganz klar: Ich verstehe es jetzt so, dass ein Endpunkt keine Verbindung via Thread zu einem Border Router aufbauen kann bzw. der Border Router kein Parent für die Children sein kann. Dafür wird ein Router Node (Eve Energy) benötigt. Richtig?- Reply
Hallo Thomas! Das Gerät ist ein Endpunkt und natürlich per Thread mit dem Thread Border Router oder einem Router wie Eve Energy verbunden. Im Gegensatz zu einem Eve Energy (Router) kann es nicht als Router für weitere Geräte arbeiten, eben nur als Endpunkt. Viele Grüße, Volker- Reply
Hallo Volker, ist irgendwann auch eine grafische Darstellung (inkl. Signalstärke etc.) des Thread Netzwerks geplant?- Reply
Hallo patrick! Da sich das minütlich ändern kann, der Thread Border Router regelt das ja, wird eine solche Darstellung nicht kommen, sorry. Viele Grüße, Volker- Reply
Hallo, Ich habe jetzt schon seid längerem den Thread fähigem apple tv 4k und seit neustem auch 4 Eve thermos im einsatz. Meine erste Frage wäre, kann man das Sleep interval von 5000ms ändern denn die geschwindigkeit ist ehrlich gesagt nicht was ich erhofft hatte oder bräuchte es dafür noch sowas wie eve energy? Und meine zweite Frage wäre, ich habe nun 2 eero 6 plus router gekauft die sowohl Zigbee als auch Thread unterstützen. Meine Frage wäre integrieren sich diese ins system mit dem neusten Thread update oder müsste ich warten bis Matter released wird um mein netzwerk zu erweitern?Mit freundlichen Grüßen
- Reply
Hallo Lucas! Alle batteriebetriebenen Geräte mit Thread haben ein sleep Intervall von 5000 ms, das tut der Geschwindigkeit keinen Abbruch. Leo Pro ist kein Thread Border Router für HAP (HomeKit Access Protocol). Ob sich das mit Matter ändern wird, müssen Sie bitte mit dem Eero-Support klären. Viele Grüße, Volker- Reply
Hello! Are there plans to produce an Eve Energy for Switzerland?- Reply
Hello Mischa! I am not aware of such plans, sorry. Most of our customers in Switzerland use a standard adapter for your plug format. Best regards, Volker- Reply
I have 2 HomePod mini: one on the ground floor and one on the first floor.I would like to buy an Eve Weather and an Eve Room.
If I understood from reading the previous replies, by using the HomePod mini, Eve Weather and Eve Room would be seen and used as Thread devices, but I could have two Partitions.
Also, in the Eve app I would not see the two HomePod mini because I would not have a Thread router in the network.
- Reply
Hello Lec! Both the actual Eve Weather and Eve Room will connect using Thread as you have two Thread Border Router (HomePod mini). To display the HomePod mini when opening Thread network we need a powered Thread enabled Eve accessory like the actual model Eve Energy (EU/US/UK/AU).You can check Thread functionality as well with this tool: the app Flame on iOS, iPadOS and M1 Macs (https://apps.apple.com/de/app/flame-services-browser/id325206381) US: https://apps.apple.com/us/app/flame-services-browser/id325206381?mt=8.
Open the app and wait a few seconds, then look for the HomePod mini or Apple TV 4K and open it. You should see the value _meshcop._udp. indicating it works as a Thread Border Router. In addition the IP number will be displayed.
Best regards, Volker
- Reply
Wir wollen Eve Aqua installieren.Das Heimnetzwerk besteht mit FritzBox 7590 mit Fritz Mesh/Thread und AppleTV 4K mit Apple iCloud.
Wird sich Eve Aqua ins Fritz Mesh/Thread einwählen oder ein eigenes Thread aufbauen oder sich mit Bluetooth verbinden, was wir wegen des Abstandes nicht wollen?
Ab welcher Modellnummer des AppleTV 4K nutzt Eve das Thread?
- Reply
Hallo! Sie haben dieselbe Frage ja parallel im Support schon gestellt und ich habe Ihnen geantwortet. Für das Thread Netzwerk sind Thread Border Router verantwortlich, also HomePod mini oder Apple TV 4K (2. Generation). Viele Grüße, Volker- Reply
Bonjour,Une chose m'échappe à l'installation.
Je prend mon app Mobile qui sert à authentifier un nouveau produit Thread que je souhaite installer, disons une ampoule.
Je met en route l'ampoule thread qui scanne le réseau 802.15.4 et qui sélectionne automatiquement un réseau auquel elle souhaite se connecte ; j'imagine que ca se fait uniquement sur le critère de la qualité du signal car elle n'a aucune information sur les réseaux existant.
Mais que se passerait-il si elle trouvait plusieurs réseaux Thread et qu'elle s'électionne le mauvais?
Va-t-elle demander à le rejoindre puis se faire refuser l'accés puis sélectionner automatiquement un autre réseau jusqu'à ce qu'elle en trouve celui connecté au téléphone qui autorisera son accés?
- Reply
Bonjour. Ce n'est pas l'accessoire (par exemple l'ampoule) qui initie la connexion Thread mais le routeur de bordure Apple. Si vous avez d'autres questions, merci de créer un ticket de support sur https://www.evehome.com/fr/support/ticket- Reply
The existing diagrams and screenshots on the Eve Thread page document a 100% Thread install but do not address a hybrid legacy+Thread install that would be common to existing Eve customers before completing migration to a completely Thread install.Q: Does an Eve Thread FTD, process legacy Bluetooth traffic, such as from an legacy Eve Motion, and then forward it over Thread to a Thread Router, or will legacy Eve Bluetooth-only devices only send traffic direct to the Homekit Hub and iOS/PadOS devices over Bluetooth?
Q: Do Eve Thread devices discontinue using Bluetooth when there is a Thread router present, or will the Thread devices continue to remain on the Bluetooth network for traffic to iOS/PadOS devices?
- Reply
Hello RE! This applies to Thread networks in general. The Thread Border Router (HomePod mini and/or Apple TV 4K 2nd generation) set up the Thread network only contains Thread enabled accessories. It is the border router to other communications like Bluetooth or Wi-Fi. So a Thread enabled accessory can't connect an accessory that is not Thread enabled. Bluetooth is only used as a fallback and for adding a thread enabled accessory. Best regards, Volker- Reply
Hi, Do you have any Thread sensors that works with any Thread gateway. I have an NXP KW41Z device that can act as a border gateway/ Leader. The door sensor and plug I got from eve is not connecting. I guess, it is supported only with HomeKit. I am looking for any generic Thread Sensor to connect to my Leader/Gateway.The following Home Kit Sensors are not connecting to an open thread Leader.
A) Eve Door & Window - Apple HomeKit
https://www.amazon.ca/Eve-Door-Window-Automatically-Notifications/dp/B08BDM47S2?ref_=ast_sto_dp&th=1&psc=1
B) Eve Energy - Apple HomeKit Smart Plug & Power Meter
https://www.amazon.ca/Eve-Energy-Built-Schedules-Connected/dp/B08YHPN63H?ref_=ast_sto_dp
- Reply
Hello Sen! HomeKit enabled accessories with Thread support like ou Eve accessories and those from other vendors require a Thread Border Router from Apple, either a HomePod mini or the new Apple TV 4K (2nd generation). Best regards, Volker- Reply
I have the eve door and window sensor within 3 meters of two ho wood minis but when I check the thread network, the sensor continually shows “disabled”. Not sure why that is?- Reply
Hello Kelvin! Please open a ticket in our support systemhttps://www.evehome.com/en/support/ticket
It's a way better place for support. Best regards, Volker
- Reply
Hi,I have 3 Wemo plugs with THREAD and of course HomePod mini. Do I need to do anything else for them to connect and talk to each other?
I am finding very little documentation about setup for THREAD
Thanks
- Reply
Hi Scott! This is more a support question for Belkin, they do the Remo plug. But as far as I understand, it should just work. You may check in the app Eve (Settings > Thread network). You can check Thread functionality as well with this tool: the app Discovery on iOS (https://apps.apple.com/de/app/discovery-dns-sd-browser/id305441017) or the version for the Mac (https://apps.apple.com/de/app/discovery-dns-sd-browser/id1381004916?mt=12). In the app at _hap._udp. you will find the Thread devices, at _meshcop._udp. your Thread Border Router (HomePod mini and/or Apple TV 4K 2021).In case this ain't work, please contact Belkin support. Best regards, Volker
- Reply
those links for the Apple App Store are not available in the USA App Store it seem- Reply
Hello Joseph! Please check for Discovery, the name of the app. Best regards, Volker- Reply
Hallo,muss für den Verbindungstyp "Thread" die Eve-App genutzt werden, oder nutzt auch die Home-App auf dem iPhone den Standart? Eve Steckdosen und der HomePod Mini sind im Einsatz
VG
Daniel
- Reply
Hallo Daniel! Eve und alle anderen HomeKit-Anwendungen von Drittanbietern (Home.app ist die einzige privilegierte) sind nur Clients, die das HomeKit-Framework und seine (öffentlichen) Funktionen verwenden. Eve zeigt lediglich das Thread-Netzwerk an, das kann Home ja nicht. Sie können das Thread-Netzwerk auch mit der kostenlosen App Discovery unter iOS (https://apps.apple.com/de/app/discovery-dns-sd-browser/id305441017) oder der Version für den Mac (https://apps.apple.com/de/app/discovery-dns-sd-browser/id1381004916?mt=12) prüfen. In der App unter _hap._udp. finden Sie die Thread-Geräte, unter _meshcop._udp. Ihre Thread Border Router (HomePod mini und/oder Apple TV 4K 2021). Viele Grüße, Volker- Reply
I just added wemo smart plug to my home. In the eve app it shows as connected by Bluetooth and the only device in the thread network. Thread status is router. I have 1 apple tv 4k with thread and 2 more without thread. Why does the plug show connected by Bluetooth and no Apple TV in the network?- Reply
Hello Doug! The Remo plug should connect using Thread if it is the Thread enabled version and your Apple TV 4K (2nd generation). Please try a tipp from Apple: Thread accessories might not use Thread following initial setup and instead use Bluetooth LE.Workaround: Move the accessory near the home hub, then toggle the accessory state several times. Just pull out the plug for one minute then plug it in again. Best regards, Volker
- Reply
Please let me know about security cameras and Thread. Eve just released blinds (which I have purchased and installed) with Thread, but the outdoor floodlight cam, which was released at the same time and is wired, did not list Thread as a capability in the description. Just a matter of the camera not making the Thread product roadmap for now or are cameras different in being able to benefit from Thread?- Reply
Hello Joel! Eve Outdoor Cam is not released yet, sorry. But it won't be Thread enabled once out. We think especially the combination of Thread & Matter is a game-changer for the smart home, that’s why we’re thrilled to bring Matter to our Thread-enabled products in the future. At this point, we don’t have any plans to share for our Wi-Fi-enabled products. Best regards, Volker- Reply
Hi Joel, unfortunately not the best answer for you. Not cameras will ever support thread primarily as it’s a light-weight communication protocol. It doesn’t have the bandwidth needed for streaming video. Expect to see cameras remain on WiFi; but sensors and simple instruction (blinds / lights / etc) devices to adopt thread. Eve CEO actually explained this much better on a HomeKit insider podcast.- Reply
Bonjour,J’ai un HomePod mini chez moi et je souhaite installer un Eve Aqua dans le jardin.
Quelle est la portée du réseau thread ? Quelle distance maximale dois-je respecter entre le noeud routeur (homepod) et le noeud terminal (Eve Aqua) ? Puis-je placer une prise Eve Energy entre les 2 pour améliorer la portée du réseau ?
Cordialement
- Reply
Bonjour, la portée est d'environ 20 m sans obstacle, moins avec des obstacles (murs, plafonds, escaliers, baies vitrées, personnes, eau, etc.). Vous pouvez placer une ou plusieurs Eve Energy entre les deux pour améliorer la couverture comme indiqué dans l'article de blog.- Reply
Bonjour, Un homepod de première génération est-il équivalent à un homepod mini pour les fonctions threads en question?- Reply
Bonjour. Non, seul le HomePod mini et le HomePod 2nd génération (à venir en février) sont compatibles Thread. Le HomePod de première génération n'est pas compatible Thread.- Reply
When I check the Thread Network on your app, one of my thread-capable devices has a “Endpoint” status (role). Right below in “General Information”, it shows Transport as “thread”, Thread status as “Child”. I have four 4 HomePod minis in my network. Does that mean that this device is running on thread? Thanks- Reply
Hello Wagner! Yes, all works as expected. Battery powered Thread enabled accessories are called Minimal Thread Devices, they are always an Endpoint in the Thread network and can't expand it. Expanding a Thread network can only be done by Full Thread Devices (powered) like the actual model Eve Energy (US) or Eve Water Guard. They are marked as Router, not Endpoint. Best regards, Volker- Reply
Hallo Volkerseid dem update auf 15.4 habe ich massive Verbindungsprobleme im gesamten Homekit.
Thread funktioniert auch nur noch teilweise.
Wenn ich eine Fenster schließe wird es noch lange danach als offen angezeigt.
Tate nur mein Apple TV 4K & Homepod Mini komplett zurück gesetzt, das hatte sonst immer geholfen, nur diesmal leider nicht. Ist euch bekannt das es massive Probleme gibt?
Und was könnte ich noch machen?
Gruß Jörg
- Reply
Hallo Jörg,bitte öffnen ein Ticket im Support-System, das lässt sich dort genau analysieren. Schreib in die Subjekt-Zeile meinen Namen, dan bekommen wir das schon hin, das ist kein Thread für das Blog. Viele Grüße, Volker
https://www.evehome.com/de/support/ticket
- Reply
Hallo,ich habe für mein Smart-Home einen HomePod Mini gekauft, um mehr Stabilität ins Netz zu bekommen. Leider scheint sich der HomePod mini nicht mit den Eve Energy Steckdosen und anderen Thread-fähigen Eve Geräten zu verbinden. Es wird bei allen Geräten angezeigt, dass diese ausschließlich mit Bluetooth verbunden sind. Hat es eventuell etwas damit zu tun, dass der HomePod in der Steuerzentrale nur auf Standby steht? Der 4K Apple TV (1. Generation) wird als verbunden angezeigt.
- Reply
Hallo Conrad! Eine Steuerzentrale wird immer als Verbunden, alle andere als Standby angezeigt, das ist ok und HomeKit regelt das ganz allein. Ich gehe davon aus, dass auf dem iPhone iCloud aktiv ist und auch der iCloud-Schlüsselbund. Und die Zwei-Faktor-Authentifizierung ist aktiv (https://support.apple.com/en-us/HT204915)Bitte setzen Sie den HomePod mini zurück
https://support.apple.com/de-de/HT208244
'HomePod durch Drücken auf die Oberseite zurücksetzen'
Dann hinzufügen mithilfe des iPhone, es muss das iPhone des Haus-Eigentümers sein und verbunden mit dem WLAN zuhause.
Viele Grüße, Volker
- Reply
Can you clarify why an Eve Energy needs to be installed in order to view the thread network? Lets say you have an Apple tv 4K and an Eve door sensor. Wouldn't that be a functioning thread network? Also does the Apple tv 4K function as a border router much like the HomePod mini? Thanks!- Reply
Hello Mika! The app Eve needs a powered Thread enabled accessory from us to as well display the Thread Border Router. The Thread network is of cause working even without. You can check Thread functionality as well with this tool: the app Discovery on iOS (https://apps.apple.com/de/app/discovery-dns-sd-browser/id305441017) or the version for the Mac (https://apps.apple.com/de/app/discovery-dns-sd-browser/id1381004916?mt=12). In the app at _hap._udp. you will find the Thread devices, at _meshcop._udp. your Thread Border Router (HomePod mini and/or Apple TV 4K 2021).Best regards, Volker
- Reply
Ich habe aktuell das Problem, dass mir unter Einstellungen/Thread-Netzwerk aktuell keine HomePods mehr angezeigt werden. Auch die Routen sehe ich nicht mehr und die Verbindungsqualität. Dabei ging das schon mal. Rechts oben ist relativ lange ein Ladekreisel. Alle Door/Window und Energy sehe ich und sind auch erreichbar. Wie kann ich wieder die Verbindungsqualität der Knoten sehen?- Reply
Hallo Björn! Wenn es sich bei den HomePods um HomePod mini handelt, sollte das gehen. Starten Sie die HomePod mini bitte mal neu. Viele Grüße, Volker- Reply
Hi just to understand in an apartment of 110m2 one Apple TV 4K one Apple TV HD an old eve energy (don’t support thread) 2new eve energy ( with thread support) 1 weather station with thread support 1acqua with thread support. All this equipment are now ne per room and the acqua on terrace doesn’t work. Whether station is working almost flawless acqua never…Now if I check thread network I can see NOTHING. The single item ( if I put the acqua and weather in the kitchen) work like a charm. So I tried to unplug everything out (not Apple TV) I start with the plug waited 1min then plug batteries in the other object and… NOTHING. So I tried to change status to all items few times ( after the turn off and retry procedure..) and… NOTHING
So what’s is the solution??
- Reply
Hello Luca! Please open a ticket in our support systemhttps://www.evehome.com/en/support/ticket
When doing so, please provide the model number of your Apple TV 4K
https://support.apple.com/en-us/HT200008
Best regards, Volker
- Reply
Mein Thread Netzwerk funktioniert soweit recht gut, ich frage mich was es mit der Exportfunktion auf sich hat. Diese erzeugt eine "Eve Thread Network Layout.evethreadlayout" Datei, die ich aber nicht weiter betrachten kann.Für mein WLAN nutze ich DOMOTZ um es zu überwachen, das kostet zwar etwas aber benachrichtigt mich wenn Ports genutzt werden die sonst nicht genutzt werden und gibt mir eine grafische Übersicht über mein WLAN.
An so eine grafischen Sicht wäre ich auch für mein Thread Netzwerk interessiert.
Viele Grüsse
Klaus
- Reply
Hallo Klaus! Die Exportdatei sagt nur Entwicklern etwas über die Thread-Verbindungen und Router. Wir nutzen Sie zur Analyse. Viele Grüße, Volker- Reply
Hi Volker,Thanks for the great article! Very useful. I haven't been able to read all comments in detail but just one question for now. I see in your screenshot the routers being named "logically". Looking at this on my phone, all my Homepod mini's and Apple TV are named like: Apple Thread Router (XX) (where XX = a combo like 3C, A4, ...). One is called Router E4 (leader). Is there any way to have the names reflect a bit more the real-life situation?
Thanks!
Xavier
- Reply
Hello Xavier! The information is pulled from the Thread network. All Thread Border Router are named 'Apple Thread Router' with (XX) as the accessory naming. Similar would happen, if you use the free app Discovery on on iOS (https://apps.apple.com/de/app/discovery-dns-sd-browser/id305441017) or the version for the Mac (https://apps.apple.com/de/app/discovery-dns-sd-browser/id1381004916?mt=12). In the app at _hap._udp. you will find the Thread devices, at _meshcop._udp. your Thread Border Router (HomePod mini and/or Apple TV 4K 2021).Best regards, Volker
- Reply
Hallo Volker,ergänzend zu dem Thread Problem von V - ich habe eine entsprechende Apple TV 4K Box der zweiten Generation. Trotzdem bekomme ich unter dem Menüpunkt "Thread Netzwerk" in der Eve App ebenfalls nur "Netzwerkstatus prüfen" angezeigt. Hast Du noch einen andere Idee, bzw. wäre es auch schon hilfreich, die Zeit, die man selbst in die Fehlersuche steckt, zu optimieren, wenn vlt. das Eve Labor noch nach einer Lösung schaut.
- Reply
Hallo Thomas,bitte öffnen Sie ein Ticket in unserem Support-System: https://www.evehome.com/de/support/ticket
Vielen Dank, Volker
- Reply
Hi! Ich nutze ein Apple TV 4K (die vorletzte Version). In der Eve App, wenn ich auf „Thread Netzwerk“ gehe, sehe ich nur „Netzwerkstatus prüfen“. Kommt aber nichts. Any tips? Danke!- Reply
Hallo V! Vorausgesetzt ist ein Thread Border Router, das ist ein HomePod mini oder das neue Apple TV 4K (2. Generation). Ihres geht hier nicht, deshalb gibt es auch KEIN Thread-Netzwerk. Viele Grüße, Volker- Reply
Hallo V! Vorausgesetzt ist ein Thread Border Router, das ist ein HomePod mini oder das neue Apple TV 4K (2. Generation). Ihres geht hier nicht, deshalb gibt es auch KEIN Thread-Netzwerk. Viele Grüße, Volker- Reply
Hallo, wenn man 5 Eve Energy Steckdosen und einen HomePod Mini in einem Raum hat, kann man dieses als Thread Netzwerk betreiben, wenn kein weiteres WLAN-Netzwerk durch einen Router (wie FritzBox) zur Verfügung steht? Würde man ein iPhone dann direkt mit dem Homepod verbinden können und dies alles in der Home App mit HomeKit nutzen können?- Reply
Hallo Felix! Thread und WLAN sind etwas grundsätzlich unterschiedliches. Ihre Konstellation lässt das Schalten per iPhone ohne Probleme zu. Für Automationen wiederum muss die Steuerzentrale Verbindung zu iCloud haben zum Synchronisieren, im Fall des HomePod mini braucht das WLAN. HomePod mini ist ein Thread Border Router, er verbindet das Thread-Netzwerk mit 'dem Rest der Welt'. Viele Grüße, Volker- Reply
I'm curious, now that Nanoleaf Shapes can act as Border Routers is there any way to control Eve devices outside of Homekit? I have no Apple products currently and I'm not a huge fan of Siri, but I would love to use your products.- Reply
Hello Forrest! Nanoleaf allows other device manufacturers to connect to the Thread network using Nanoleaf’s own API. However, there is no support from Apple for this (yet). I.e. there is no dynamic switching between Thread and Bluetooth when Thread fails.This may change withthe upcoming standard Matter starting mid next year but we are not sure.
- Reply
Bonjour,j'ai 2 Apple TV 2021 dans la maison.
Les deux sont connectées en Ethernet.
J'utilise l'application EVEHOME pour connaitre l'organisation du réseau Thread.
L'une des deux Apple TV a cessé de diffuser le réseau Thread deux mois après sa mise en service.
Ce qui fait que les accessoires Thread à proximité de cette Apple Tv ne sont plus mise à jour dans Homekit.
La mise à jour se fait uniquement en Bluetooth quand j'approche mon téléphone de l'accessoire.
L'autre Apple TV continue à diffuser Thread, et communique correctement avec d'autres accessoires Thread.
Comment faire pour que Thread fonctionne sur les 2 Apple Tv en même temps ?
Merci beaucoup
- Reply
Bonjour. Réessayez après avoir complètement redémarré l'Apple TV qui pose problème (débranchez-la du secteur, attendez 3 mn et rebranchez-la).Si le problème continue, créez un ticket de support technique sur https://www.evehome.com/fr/support/ticket
- Reply
The Thread Network screen for me shows a loader saying “Checking network status…” forever.Any ideas what to do to debug this further?
Is there a requirement to have at least one Eve product in the network to use this feature of the Eve app?
- Reply
Hello Joe! No, but you need at least one Thread Border Router, a HomePod mini or the new Apple TV 4K (2021). And a Thread enabled accessory. Best regards, Volker- Reply
I have the same situation and I have a HomePod mini. Is there something that I need to do to initiate the thread network?- Reply
Hello Clive! You need at least one Thread enabled accessory, check here if one of your Eve accessories ist: https://www.evehome.com/en/identify-your-eve-accessoryBest regards, Volker
- Reply
Dear Eve, Ive just get a brand new Eve Energy with thread to work in pair with my Others old (non thread) Eve Energy and with my Homepod Mini, but when I check the thread network on the Eve App, it shows that the new Eve (the thread one) is connected via Bluetooth (instead my other Thread accessory like nanoleaf essential bulb are connected via Thread). In the package and in the app the new Eve Energy appears like capable of thread capabilities.Thank you
- Reply
Hello Ivan! I assume the Eve Energy are in range to the HomePod mini, like 10-15 meters. In this case please try a tipp from Apple: Thread accessories might not use Thread following initial setup and instead use Bluetooth LE.Workaround: Move the accessory near the home hub, then toggle the accessory state several times. I would just pull the Eve Energy out for one minute and plug it in again. Wait 2-3 minutes then. If this does not help please open a ticket in our support system:
https://www.evehome.com/en/support/ticket
Best regards, Volker
- Reply
Hi, I have 2 Eve door sensors and a HomePod min, but the Eve app thread network only shows the endpoint sensors. It does not show the mini. What am I missing?- Reply
Hello AJ! To display the Tread Border Router (HomePod mini) we need a powered Thread enabled accessory from Eve like Eve Energy (US/UK/EU). It is needed to explore the complete Thread network. Best regards, Volker- Reply
Hallo, bin gerade dabei mein Gartenhaus per Thread anzubinden. Funktioniert tadellos, auch über größere Reichweiten, auch wenn man etwas experimentieren muss. Da ich einen kleinen Heizlüfter zum Frostschutz benutzen will, wollte ich sicherheitshalber einen Eve Smoke einsetzen. Wie sieht es hier mit Thread aus? Ist dies geplant, wenn ja, wann? Neugeräte oder Update für „Altgeräte“? Bei dem nicht ganz unerheblichen Preis würde ich das gern vorher wissen, danke, Gruß Daniel- Reply
Hallo Daniel, vielen Dank für Deine Anfrage und Ihrem Interesse an unserer Eve Smoke. Sie ist aufgrund extremer Lieferschwierigkeiten unseres Produktionspartners zur Zeit leider nirgendwo verfügbar, und ein genaues Lieferdatum ist ebenfalls nicht bekannt. Es ist uns auch nicht möglich, Informationen über künftige Produkte oder den zeitlichen Rahmen ihrer Veröffentlichung bekannt zu geben. Über Neuigkeiten und Updates informiert unser Newsletter, für den Sie sich hier anmelden könnenhttps://www.evehome.com/de/newsletter
Viele grüße, Volker
- Reply
Curious if there is a way to know which appleTV or HomePod Mine is which in the thread view of the app. I see the RLoc digits are listed - apple thread router (XX), but how can trace this back to which apple device this is.Also I know I know the answer but the Eve Rooms are not showing up in the thread view - this is normal?
Thanks….
- Reply
Hello Stu! Sorry but we display the information the Thread network provides. You can't trace it back. The room for Thread Border Router is always set to Unknown Room as Thread does not provide the information. You can check Thread functionality as well with this tool: the app Discovery on iOS (https://apps.apple.com/de/app/discovery-dns-sd-browser/id305441017) or the version for the Mac (https://apps.apple.com/de/app/discovery-dns-sd-browser/id1381004916?mt=12). In the app at _hap._udp. you will find the Thread devices, at _meshcop._udp. your Thread Border Router (HomePod mini and/or Apple TV 4K 2021).Best regards, Volker
- Reply
If I use two HomePod Minis and 3 Nanoleaf Bulbs, and one Nanoleaf light strip. How many Thread extenders will that be? I’m trying to extend my Thread network as much as possible.- Reply
Hello Herbert! As you are having two Thread Border Router and four Thread Router this looks good in terms of range. Please check more in this blog post: https://www.evehome.com/en/blog/discover-your-thread-networkBest regards, Volker
- Reply
hello, I just got a HomePod mini and I have the eve energy (US) - a couple of the later, but when I go to the eve energy app, and look up the thread network, it says "Checking network status". Any thoughts?- Reply
Hello Sanjay! For using the Thread network you need to use the actual model Eve Energy (US). Please check the serial number of the Eve Energy (US).The serial number can be found on the bottom side of the device, S/N:…, or below the QR code and starts with two letters. Or in the App Eve at Settings > Accessories > Your Eve Energy > Arrow right from ID > Serial Number. Only if the serial number starts with VV this is the Thread enabled model Best regards, Volker- Reply
Guten Tag,ist es in irgendeiner Weise möglich das Eve Thermostat über Amazon Alexa Sprachsteuerung anzusteuern?
Vielen Dank. Mit freundlichen Grüßen, Ben
- Reply
Hallo Ben!Zumindest heute geht das noch nich. Das kann im Zusammenhang mit Matter im nächsten Jahr möglich sein, zumindest für das Eve Thermo (2020). Viele Grüße, Volker
- Reply
Hi there. I currently have 3 door sensors and 4 energy plugs. They all work fantastically as Thread devices with my Apple TV. When will you update the water leak sensor to be a full thread device? I am holding out hope that you will be the Thread accessory leader and am hoping to have more Thread accessories soon.- Reply
Hi John! The current generation of Eve Water Guard is not ready for Thread. We will be releasing new hardware generations of many Eve devices with Thread support in the coming months, but unfortunately can't give any further details on when this will be the case for Eve Water Guard at this time.Here's a list of all the currently available Thread-enabled Eve accessories:
https://www.evehome.com/de/identify-your-eve-accessory
I wish you a great weekend, Volker
- Reply
Hallo zusammen, immer wieder steht auch geschrieben, dass das Thread Netzwerk auch mit der neuen Apple TV 4K HDR erzeugt werden kann.Jedoch fügen sich meine nicht als Router in das System ein?
Mache ich hier etwas falsch?
- Reply
Hallo Thomas! Neben dem HomePod mini kann auch das neue Apple TV 4K (2021) als Thread Border Router arbeiten. Es wird wie ein Standard-Apple TV dem Zuhause hinzugefügt und arbeitet dann ohne weitere Konfiguration als Thread Border Router. Natürlich benötigen Sie auch Thread-fähige Geräte.Falls Fragen zur Einbindung bestehen, nutzen Sie bitte unser Support-System: https://www.evehome.com/de/support/ticket
Viele Grüße, Volker
- Reply
Sind auch Nanoleaf Shapes nach dem Update auf Thread in Netzwerk zu finden?- Reply
Hallo Martins! Nanoleaf Shapes unterstützen nicht als Gerät Thread, sondern stellen einen Thread Border Router zur Verfügung. Mit der neuen Firmware erlaubt Nanoleaf es anderen Geräte-Herstellern, mittels einer eigener API sich ins Nanoleaf-Thread-Netzwerk zu verbinden. Allerdings gibt es dafür (noch) keinen Support von Apple. D.h. es gibt kein dynamisches wechseln zwischen Thread und Bluetooth wenn Thread ausfällt.Nanoleaf Shapes werden also unter HomeKit nicht als Thread-fähiges Geräte angezeigt, weil sie das nicht sind und auch nicht als Thread Border Router für HomeKit. Viele Grüße, Volker
- Reply
My thread network just stopped working the other week. I’m running two Eve Aquas and two Eve Energys with a 4K Apple TV as the hub, google wifi as my network. All of these are thread certified and yet all I get is “connected via Bluetooth” or “unreachable”.I’ve really hit a wall trouble shooting it and could use help.
- Reply
Hello Todd!This is more a support question, please open a ticket a support ticket here:
https://www.evehome.com/en/support/ticket
Please provide the information what model exactly you have as Apple TV 4K and serial numbers the Eve accessories have.
Best regards, Volker
- Reply
Hello! I got useful information from your blog about how Thread works. I'm trying to figure out how thread works with devices that are in the same group. Does it send separate commands for each device or does it send a single command for all devices in the group just like the group commands in the zigbee protocol?- Reply
Hello Chris! The Thread Border Router (HomePod mini or Apple TV 4K 2021) communicates with the accessories where powered accessories can relay a command, battery powered are and endpoint. That's pretty much it. Best regards, Volker- Reply
Hi - Wondering when the North American Switch will support thread and if we need to wait for a next generation Switch or if your existing switches will be able to support thread in the near future. J- Reply
Hello Jay! The current generation of Eve Light Switch (US) is not ready for Thread. We will be releasing new hardware generations of many Eve devices with Thread support later this year, but unfortunately can't give any further details on when this will be the case for Eve Light Switch (US) at this time.Here's a list of all the currently available Thread-enabled Eve accessories:
https://www.evehome.com/de/identify-your-eve-accessory
Best regards, Volker
- Reply
Hi, and thanks for the article. I finally decided to start expanding my HomeKit setup after getting a HomePod mini a few months ago, and I love my 2 Eve Energy.Do you have plans to add a Plug-in Dimmer accessory? I currently have a dimmable floor plugged in to an Eve Energy, but I’d love to be able to use HomeKit to control the light level on it. The few options available on the market now do not support Thread, and I’d much rather get one that does, and even more so from Eve. Thank you!
- Reply
Hello Phong Le! As of today I am not aware of plans for a dimmable version of Eve Energy, sorry. Best regards, Volker- Reply
Hi , currently I’m using a few Eve Aqua’s with 2 extenders because of range problems I had.If I switch to Thread, do I still need the extenders?
I have a new Apple TV and bought 2 thread enabled eve energy plugs.
- Reply
Hello Antonie! If you are using the new model Eve Aqua it will use Thread and you have to free it from Eve Extend to use it. But it needs to be the new model, please check here: https://www.evehome.com/en/identify-your-eve-accessoryBest regards, Volker
- Reply
Hallo zusammen, warum wird bei mir in EveHome unter dem Thread Management angezeigt, das Thread gerade bei manchen Geräten über Bluetooth kommuniziert und manchmal über Thread? Als Boarder Router nutze ich den ATV4K 2021. Ich habe alles frisch aufgesetzt und habe trotzdem noch Verbindungsabbrüche, obwohl alle Eve Energy Geräte nur max. 3 Meter voneinander entfernt arbeiten. Das Thread die Verbindungsprobleme löst konnte ich bedauerlicherweise noch nicht feststellen. - Das macht mich echt unzufrieden :-/Habt ihr Tipps?
- Reply
Hallo Sven! Mit der Frage sind Sie im Support deutlich besser aufgehoben: https://www.evehome.com/de/support/ticketGrundsätzlich dauert es bis zu einer Minute, bis Thread-Netzwerk in der App Eve den Status anzeigt, die Verbindungen müssen erst geprüft werden. Dann ist auch die Frage, welche Geräte Sie einsetzen neben dem Apple TV 4K (2021). Viele Grüße, Volker
- Reply
I have a new Apple TV 4K 2021 that I was told is Thread-enabled. According to my iOS Eve app, my Thread network shows my 3 Nanoleaf Essential bulbs. Each of the bulbs is listed as a router, which is what I expected. However, the Apple TV is not listed as part of the Thread network. Is there a reason that the Apple TV does not appear in Eve App? The Apple TV appears to be working fine, works with Siri, and even appears as an accessory in the HomeKit app. I don't see anything in the Apple TV Settings that suggests Thread functionality has to be turned on in any way. Thanks in advance for any info you can give me.- Reply
Hello Ed! All works as expected. To show the Apple TV 4K as well in Thread Network a powered Thread enabled Eve accessory is needed, this would be an actual model Eve Energy (US/UK/EU). We need it to inspect the Thread network. But even without functionality is granted. Best regards, Volker- Reply
Great work from Eve to bring Thread to the HomeKit environment. I do have a few questions:- currently Eve Door does not reach my Apple TV 4K. If I get a new Apple TV with Thread support, is the range better than Bluetooth?
- I seem to remember that Nest Protect did / does support Thread. Will it work with Eve?
- I believe Eve motion does not support Thread. When will we see version that does support Thread?
- Reply
Hello Paul! Using the Apple TV 4K (2021) and the actual model Eve Door & Window will give you a bit more range compared to Bluetooth. But in difference to Bluetooth you may expand the network using a powered Thread enabled accessory 'half way. This could be an Eve Energy (EU/US/UK) or a Nanoleaf Essential bulb or light strip.As of today the Nest product won't. This may change within the next year with Matter but ne information so far, sorry.
The current generation of Eve Motion is not ready for Thread. We will be releasing new hardware generations of many Eve devices with Thread support later this year, but unfortunately can't give any further details on when this will be the case for Eve Motion at this time.
Here's a list of all the currently available Thread-enabled Eve accessories:
https://www.evehome.com/de/identify-your-eve-accessory
Best regards, Volker
- Reply
Hallo Volker, mir ist noch nicht richtig klar, ob nicht Threat fähige EVE „Altgeräte“ als „Children“ bzw. letztes Kettenende von den Threat fähigen Geräten eingebunden werden, oder ob diese ihren eigenen Weg zur Steuerzentrale finden müssen, also somit von der Reichweitenverlängerung nicht partizipieren.Übrigens, bei der AMV Fritzbox App gibt es eine graphische„Baumdarstellung“ des Mesh Netzwerkes. Es wäre toll, wenn Ihr etwas Ähnliches auf Threat bezogen auch in Eurer App einführen würdet.
Grüße
Andreas
- Reply
Hallo Andi! Bei Eve-Geräten, die Thread nicht unterstützen, fehlt ein Bauteil auf dem Chipset, der Sender/Empfänger für IPv6. Sie können folglich nichts in einem Thread-Netzwerk, sondern verbinden sich wie gehabt per Bluetooth.Die Darstellung eines Mesh-Netzes in der Fritzbox und des Thread-Netzes verfolgen grundsätzlich andere Ansätze. Deshalb haben wir die aktuelle Darstellung gewählt. Natürlich wird die immer weiter verbessert, wie alle Funktionen der App Eve. Viele Grüße, Volker
- Reply
I understand that the Eve Extend is a ‘Bluetooth extender’ so whilst it works off wifi it talks to its connected Eve accessories via Bluetooth.So if I am I a house and send a request from my iPhone to an Eve plug... it would try Bluetooth first and if can’t get a connection send the request out over wifi to the extend which would then Bluetooth the device? And if I have an Apple TV as a HomeKit hub, if I was sending in a remote request that would forward the request onto the Extend?
And presumably I could trial how effective an extend might work for me if I moved the Apple TV into the spot where I would place the Extend? It would effectively do the same job? Thanks
- Reply
Hello Peter! Eve Extend connects using Bluetooth with surrounding Eve accessories and transmits the signal using your Wi-Fi. It is the ideal solution for more remote locations in the home where you don't have Bluetooth range to the iPhone and the home hub. Best regards, Volker- Reply
Great article. I am in New Zealand and have just purchased an Eve power plug. I have also added an Apple TV HD located centrally in the house as a hub in Apple HomeKit.The plug works well in the house with a reasonable range. I understand that it’s a Bluetooth connection but seems pretty good. The issue is when I try it just under the wooden floor. (I have an outlet for outside lights I want to use it on) where the range drops dramatically. Nothing special with the floor.. just simple wood with some fibreglass wool insulation. In fact I virtually have to stand over the spot in the floor to get a connection.
I have checked the Eve app and the ‘Thread Network’ in settings and it says no thread network active.
I guess the plug is the only thread device and the Apple TV is not thread but does act as a hub. So when I switch the plug remotely I assume it will come to the Apple TV via wifi and the that Apple TV will send out a Bluetooth request.
So interested in any thoughts around the range as soon as I move it 6 inches under a wooden floor... and in theory I could presumably buy another thread device and place just above it on the floor and the the thread network will manage it all for me, although that would seem a bit like overkill. :-)
Thanks
- Reply
Hello Peter! Eve Energy (AU) uses Bluetooth to connect to the iPhone or the home hub (Apple TV 4/4K). As the version of Eve Energy (AU) does not support thread, this is the only way. For remote access the Apple TV 4/4K must be in Bluetooth range. Best regards, Volker- Reply
Hallo, habe ein Eve Aqua, Homepod mini + Eve Energy. Alle Geräte neu und Thread fähig. Updates installiert!In der Thread-Übersicht der Eve-App tauchen Eve Aqua als Endpunkt und Eve Energy als nicht erreichbar auf.
Klappt nur via Bluetooth (Eve Energy), wenn ich in der Nähe bin.
1. Wie weit kann der Homepod mini maximal von der Eve Enery entfernt sein?
Bisher: Andere Etage und am Ende des Hauses.
2. Warum wird der Homepod mini nicht in der Eve App angezeigt?
(Auch nicht unter unbekannter Raum) Der Raum ist gar nicht vorhanden.
3. Worüber kommuniziert der Homepod mini mit Eve Aqua und Eve Energy (solle es mal klappen) Wifi oder Bluetooth?
- Reply
Hallo Alex! Alles steht und fällt mit dem Eve Energy (EU). Sobald das Thread nutzt, wird auch der HomePod mini angezeigt. Da deine anderen Eve-Geräte Endpunkte sind, muss das Eve Energy halbwegs in der Nähe zum HomePod mini sein also maximal 8-10 Meter. Sollte das der fall sein, empfehle ich einen Soft-Reboot, zieh das Eve Energy einfach für eine Minute aus der Steckdose und steck es wieder ein. Reicht auch das nicht, platziere es zum Test näher am HomePod mini. Viele Grüße, Volker- Reply
Ggf. wird auch ein älteres Modell des Eve Energy genutzt. Nur die neueste Version unterstützt Thread. Optisch sind die Versionen identisch. Eine Übersicht der Thread fähigen Geräte steht auf der Eve Homepage zur Verfügung.- Reply
Why is it that (in EU) that the Eve Energy is a router (aka requirement for Thread), but the Eve Energy Strip is useless here. I thought all powered Thread devices could act as routers next to the Homepod Mini Border router.- Reply
Hello Raymond! The HomePod mini is a Thread Border Router - always. Same applies to the new Apple TV 4K. In a Thread network the new Eve Energy (EU) can act as a Router in Thread (besides Bluetooth), Eve Energy Strip (EU) uses Wi-Fi and not Bluetooth so there is no need for Thread support. Battery powered Thread enabled accessories act as an Endpoint. Best regards, Volker- Reply
I currently have 7 eve energy w/thread throughout my home here in Germany, but I’ve noticed that with my three HomePod minis they are titled as being in an “unknown room”. In my home app they have been put in their respective rooms but the eve app does not list them. Why is that? Lastly, they are not even classified as HomePod minis, but they are titled as follows: Apple thread router B8 / Border Routers / Apple Thread Router CC Router and finally Apple Thread Router E8 Router. Could you please explain to me what this all means? It would be greatly appreciated.- Reply
Hello Ndzlow! Thread Border Router are not assigned a room in the Thread network, that's why it is Unknown Room. And the report their name as Apple Thread Router + 2 digits - this is displayed. All correct. You may as well use the app Discovery, it's free if you don't like the way it is displayed in Eve. In iOS (https://apps.apple.com/de/app/discovery-dns-sd-browser/id305441017) or the version for the Mac (https://apps.apple.com/de/app/discovery-dns-sd-browser/id1381004916?mt=12). In the app at _hap._udp. you will find the Thread devices, at _meshcop._udp. your Thread border routers.- Reply
Hi! Thanks for the great article explaining thread.Do you plan to update the US light switch for thread soon? I see that only the EU version has been updated. Thanks!
- Reply
Hello JD! All upcoming Eve accessories and new models of existing accessories will feature Thread. I don't have any plan yet on when this will happen for Eve Light Switch (US), sorry. Best regards, Volker- Reply
Hallo, ich habe einen 2021 Light Switch, der auch als Thread Schalter Router (Leader) in der Eve App angezeigt wird. Allerdings wird mein HomePod mini nicht als Router in der Eve App erkannt.Über diesen möchte ich allerdings mein 2021 Eve Aqua ansteuern.
Was kann der Grund sein, dass der HomePod mini nicht erkannt wird? Switch und HomePod stehen nah beieinander. Vielen Dank
- Reply
Hallo Herb! Ob angezeigt oder nicht, der HomePod mini arbeitet automatisch als Thread Border Router, auch für das Eve Energy. Ich gehe davon aus, dass der HomePod mini das HomePod OS 14.6 nutzt, falls nicht, aktualisiere ihn bitte.Dann führe einen Reboot durch, indem Du die Stromverbindung für eine Minute trennst und wieder verbindest. Warte dann 3-4 Minuten. Viele Grüße, Volker
- Reply
Hi,When will the software update for EVE Thermo be available for Thread Support? And the second question: I have an Apple TV 4K (2gen 2021) and there is no Thread available in the EVE application - why?
- Reply
Hello Patryk! The update for Eve Thermo (2020) will be available later this year, at leat for the next heating season. To display Thread Network in the app Eve you need at least one Thread enabled accessory like the Eve Energy (EU,2020). Best regards, Volker- Reply
Very much looking forward to Thread being deployed more widely and Eve is one of my go to product brands with Aqua, Degree, Room, and Door/Window deployed widely. However, some products have had significant stock outs for quite some time and its unclear if this is Thread upgrade related or just general issues. In particular I’m in the market for a whole home Eve Smoke install (15 units) but curious to know if a Thread enabled one is expected this year or not?I’m hoping the upgraded Eve Smoke comes in a mains enabled (with battery backup) version as well as the 10 year battery version so some can act as routers, and the dual sensor (Smoke & Heat) remains unaffected. Just a sneaky request there. Any news that can be shared or I should I be looking to cross the divide to the world of Nest given their announcements to support Thread and Matter?
- Reply
Hello Ian! The current generation of Eve Smoke is not ready for Thread. We will be releasing new hardware generations of many Eve devices with Thread support later this year, but unfortunately can't give any further details on when this will be the case for Eve Smoke at this time. Well, we are member of the Matter group, don't expect accessories using Matter from any vendor before the end of the year or early next year. But Thread will be mandatory…Best regards, Volker
- Reply
I have three Door & Window sensors (thread), and two HomePod Minis, and everything appears to be functioning ok, though I can't judge responsiveness as I don't use your sensors to trigger anything that occurs on a regular frequency.I have the new Apple TV 4K due to arrive tomorrow, and ordered the new thread enabled Eve Aqua. I'm wondering whether there's any benefit to adding an Eve Energy (i.e. a router) to this setup? If all Endpoints can be seen in your app and appear to function correctly, and I have HomePod Minis and a new Apple TV 4K spaced throughout my home, what benefits are there in adding Routers?
- Reply
Hello David! Powered Thread enabled accessories with expand the Thread network as they can act as a Thread router in the Thread network. All battery powered are always endpoints. Depending on the range you have to cover a powered one can help. But your probably don't need it having two HomePod mini and a new Apple TV 4K soon. Best regards, Volker- Reply
Can Eve Thread-enabled devices work with the Thread-enabled devices from other manufacturer, for example, the Nanoleaf Essentials A19 Bulb?- Reply
Hello Charles! Of cause they do, that's the plan behind. I am using 14 Thread enabled accessories, among three Nanoleaf Essential bulbs. Best regards, Volker- Reply
Guten Tag, ich habe einen eve weather in meinem aufblasbaren Whirlpool in einer wasserdichten Kunstoffbox versenkt. In ca. 3 Meter Entfernung hinter einer Balkontüre steht ein HomePod Mini. Trotzdem habe ich momentan keine Verbindung zu dem Sensor, wobei es am Anfang bestens funktioniert hat (ca. 24h).Woran kann das liegen? Der Sensor ist direkt am Beckenrand versenkt und durch eine ca. 10cm dicke Luftkissen-Wand und die Balkontür Scheibe vom HomePod Mini getrennt, das sollte thread doch schaffen ?
Oder muss ein eve Energy im Netzwerk sein, damit der eve weather thread nutzt ?
- Reply
Hallo Florian! Das ist eigentlich ein typisches Support-Ticket, hier die Adresse für das nächste Mal: https://www.evehome.com/de/support/ticketIch bin mir nicht sicher, ob die diversen Hindernisse die Kommunikation verhindern, Wasser, Kunststoffbox, versenkt, Balkontür. Zunächst würde ich mal die App Eve öffnen und dann zu Einstellungen > Thread-Netzwerk gehen. Was wird da für Eve Weather angezeigt? Ein Strom-Versorgtes Gerät mit Thread würde nur Sinn machen, um das Mesh-Netzwerk zu erweitern, also bei Distanzproblemen helfen wenn auf halber Strecke genutzt. Oft hilf ein Neustart des HomePod mini, einfach den Stecker für eine Minute ziehen, wieder einstecken und 3-4 Minuten warten. Viele Grüße, Volker
- Reply
Hi! Many thanks for the article, very interesting to see how it all works and I’m enjoying building my network!I have a HomePod mini and 5 thread accessories, however the HPM is not showing up in the “Thread Network” section of the Eve app? Just wanted to check if this was normal?
Many thanks!
- Reply
Hello Ben! To make the HomePod mini appear at least one Eve accessory must be installed, that can act as a Thread router. As or today this is Eve Energy (EU/UK/US) or Eve Light Switch (EU): Best regards, Volker- Reply
Were you able to get the HPM to show up on your thread network because I’m having the same problem- Reply
Hello Dominick! The HomePod mini will only show up in Thread Network if you have a Thread enabled Eve Energy (EU/UK/US) or Eve Light Switch (EU) installed. It needs a powered Eve accessory to be displayed. Best regards, Volker- Reply
Now that more people are expanding their Thread networks, is it possible to get a legend for the symbols used in the Thread Network section of the Eve app?- Reply
Hello Ian! It is pretty much self-explaining.A square is the symbol for the leading Thread border router. A home icon symbold a thread router accessory, a filled home symbol a thread router (leader) and zz an endpoint (battery powered) accessory. Most of this in the explaining test. Best regards, volker- Reply
Hi Volker, what about the colouring of each thread connected device. For example, one of my Nanoleaf bulbs is correctly showing as “Router” in the thread network screen, but this the text is a light orange colour, my other 8 nanoleaf bulbs have “router” in a dark grey text.- Reply
Hello Tony! The text shows the color of the room the accessories are in. Best regards, Volker- Reply
Hi! I have just bought an eve aqua and eve weather and of course they can't be seen on my network. it seems like the eve extender is from the pre-thread days. Would buying an eve energy be a better way to go even if nothing is getting plugged into it right now? Also, I don't have a homepod mini but do have an appletv 4k. some places seem to say that it can also be a border router? thanks!- Reply
Hello Gerry! The new versions of Eve Energy (EU/UK/US) would act as a Thread router in the mesh network and expand it - even if nothing is plugged in. To use Thread a Thread Border Router is mandatory. This is either the HomePod mini or the just announced new model of Apple TV 4K. The old one (like mine) won't. Best regards, Volker- Reply
Dang, I'm sure my AppleTV 4K doesn't support it either so for me a thread network won't happen until I naturally upgrade that hardware. So then for now is the eve extender the best way to get my new eve devices onto my network? Do you intend to upgrade the extender to support thread so its more futureproof?- Reply
Hello Gerry! Eve Extend uses Wi-Fi and won't get Thread support. Best ragards, Volker- Reply
Will the current Eve Water Guard (2020 version) be able to have Thread with a firmware update?- Reply
Hello Scott! The current generation of Eve Water Guard is not ready for Thread. We will be releasing new hardware generations of many Eve devices with Thread support later this year, but unfortunately can't give any further details on when this will be the case for Eve Water Guard at this time.Here's a list of all the currently available Thread-enabled Eve accessories:
https://www.evehome.com/de/identify-your-eve-accessory
- Reply
Is there a schedule fir the update of EVE Thermo to be Thread ready?- Reply
Hello Harko! The firmware update for Eve Thermo (2020) with Thread support will be available later this year. Best regards, Volker- Reply
HalloIn meinem Smarthome befinden sich 2 Eve Aqua, 1 HomePod Mini (Entfernung ca Aqua ca. 10 Meter) und 1 Eve Energy (Entfernung zu HomePod Mini ca 10 M und zu Aqua 20 Meter) - obwohl alle Geräte Threadfähig sind läuft die Kommunikation (einwandfrei) über BT. Wäre Thread nicht sinnvoller bzw. wie kann ich dies erreichen? Den HomePod Mini habe ich mehrmals resetet danke lg Marcus
- Reply
Hallo Marcus! Nur wenn es sich um ein Eve Aqua (2020) und ein Eve Energy (EU, 2020) handelt, können die überhaupt Thread nutzen. Die Distanz mag allerdings schon etwas am Rand liegen. Ein Eve Energy (EU) auf halber Strecke würde das Netz erweitern. Sonst gibt es halt nur Bluetooth-Verbindung. Viele Grüße, Volker- Reply
Hallo VolkerIch bin an einem Projekt für ein Gebäude mit 30 Heizkörper. Kann ich als Thread-Router auch Fremdprodukte nutzen?
Mit freundlichen Grüßen Ueli
- Reply
Hallo Ueli!Der einzige Thread Border Router für HomeKit ist der HomePod mini. Viele Grüße, Volker
- Reply
When will Eve Energy US model ship? It's already Apr 11 and I still can't find it in any store.- Reply
Hello Raymond! Due to shipment delays this is delayed to April 27th. We apologize. Best regards, Volker- Reply
Erweitert ein Node auch immer das Bluetooth Netzwerk und ist damit praktisch ein Übersetzer? Bei einem iPod Mini ist mir das klar. Aber würde das auch bei einer Eve Steckdose funktionieren?Beispiel: Im Keller funktioniert die Steckdose über Thread einwandfrei. Bluetooth kommt aber nicht mehr an. Wenn ich jetzt aber ein Gerät habe das nur über Bluetooth ansprechbar ist, würde es dann aufgrund der über Thread angebundenen Steckdose ansprechbar sein?
- Reply
Hallo Axel! Die Kommunikation bei Thread läuft über IPv6, Bluetooth-Geräte können hier nicht eingebunden werden. Die Erweiterung des Thread-Netzwerkes läuft nur mit anderen Thread-fähigen Geräten. Viele Grüße, Volker- Reply
Hallo Volker,ich habe 6x Eve Thermo im Haus installiert und die Seriennummer beginnt bei allen mit CM.
Warum werden sie in der EVE App beim Thread-Netzwerk nicht angezeigt?
Gruß Ingolf
- Reply
Hallo Ingolf! Die Eve Thermo (2020) haben zwar schon die Hardware-Voraussetzung für Thread, das Firmware-Update ist aber noch nicht verfügbar. Das kommt später im Laufe des Jahres. Viele Grüße, Volker- Reply
Hi Volker.How long is the range capacity of thread compared to Bluetooth? I’m considering buying Eve Acqua, and I have and HomePod mini. The distance between them is about 10 meters and I have not a outlet outside for say an Eve Energy, so I’m only dependent on HomePod mini and thread.
- Reply
Hello CrOoky! This may work or be already on the edge. Depends on the wall and window between. Best regards, Volker- Reply
Frage:nWarum werden meine 4 HomePod Minis nicht in der Eve App Thread-Übersicht angezeigt?Die Nanoleaf Essentials A19 E27 hingegen werden dort angezeigt.
Hier im Blog, neben der Überschrift „Thread unter der Lupe“ sehe ich eine Art iPhone-Screenshot, bei diesem werde die HomePod Minis angezeigt. Ideen, warum ich meine 'smarten' Lautsprecher nicht angezeigt bekomme?
Alle Geräte habe die neueste Firm-/Software u d auch die Eve-App liegt in der aktuellste Version vor.
- Reply
Hallo Aaron! Sobald ein Eve Energy (EU, 2020) unter den Geräten in Deinem Netzwerk ist, werden die HomePod mini in Unbekannter Raum auch angezeigt. Es muss ein Eve-Gerät sein, das als Thread-Router arbeitet, das ist aktuell nur Eve Energy (EU). Die HomePod mini werden in Unbekannter Raum angezeigt, das geht nicht anders und der Name is auch Router. Das dargestellte HomePod mini im Screenshot dienst nur der Verdeutlichung. Viele Grüße, Volker- Reply
Hallo Volker, Dankeschön für Ihre Antwort. Ist meine Denke falsch, dass ein in jedem Zimmer aufgestelltes (Border)Router-fähiges Thread-Gerät (wie der HomePod mini), das Netzwerk stabilisiert?Oder ist die Eve App (nur noch) nicht in der Lage, dieses Netzwerk korrekt abzubilden, im Hintergrund jedoch läuft diese Vernetzung via Thread unsichtbar?
Hoffe Eve werkelt fleißig an diesem Problem, denn eigentlich nutze ich Eure App sehr gerne und lieber als die Home App von Apple.
- Reply
Hallo Aaron! Sind mehrere Thread Border Router (HomePod mini) in einem Netzwerk, werden alle von HomeKit genutzt, das Thread-Netzwerk aufzubauen und zu verwalten. Es werden auch alle angezeigt und die Routen der HomeKit-fähigen Geräte mit Thread-Unterstützung. Wie schon gesagt, muss ein Eve-Gerät, das per Strom verbunden ist, dabei sein. Das ist aktuell das Eve Energy (EU). Eve ist die einzige HomeKit-fähige App, die das Thread-Netzwerk abbildet. Viele Grüße, Volker- Reply
I have Thread for HomeKit with some other vendor light bulbs. I have the Aqua and waiting for the thread update. My question is I have 6 HomePod Mini but don’t see them on the thread network? I see in your picture above it shows HomePod mini in an unknown room. All I see is two light bulbs as routers? Is Thread enabled on HomePod Mini?- Reply
Hello Manuel! You are using a Nanoleaf Essential bulb, it is the only Thread enabled bulb, so. And it can act as a router and already does. The HomePod mini will be displayed in the Thread Network in Eve once you have one Eve accessory added that can act as a router, like Eve Energy (EU) or Eve Energy (US/UK). The EU version is already shipping the US model with Thread support will start shipping on April 6th, the UK version on May 4th. I wish you a great weekend, Volker- Reply
Great article! If you have a non-thread device amongst thread devices, can that non-thread device connect to a router node or border router if it is closer than the main network router or wifi?- Reply
Hello Correy! This is not possible of cause. Thread enabled accessories can only talk to other Thread enabled. Have a great weekend, Volker- Reply
When I will setup my own border-router (using a Raspberry Pi 3B) which supports OpenThread. Can I connect, access or control Thread-supported Eve devices?- Reply
Hello Timon! No, this won't work for any HomeKit enabled accessory with Thread support from any vendor. What's needed is a Thread Border Router for HomeKit. The only one available is the HomePod mini. Best regards, Volker- Reply
What is the time frame to see thread applied to Eve Energy products for Australia? Or even some more products for Australia?- Reply
Hello Shane! Ihave no information yet on a Thread enabled version of Eve Energy (AU), sorry. Best regards, Volker- Reply
I have 2 Eve Energy (EU) Model 20EBO8301 with FW version 2.1 (2045). Both say Thread Status- Disabled.I am also showing 4 other routers, (Router 28, 78, C4, and F4) in an unknown room, that I assume are my HomePod Minis.
Am I missing something here or should the thread network be enabled and running?
- Reply
Hello Rob! Are you using four HomePod mini? Please power cycle both Eve Energy, just plug off the wall outlet for a minute, plug in again. Open Thread Network in Eve again, and be patient for a minute. If it does not work as extected, please mail me, this is not the place for support. This would be https://www.evehome.com/en/support/ticketor in this case mal me at [email protected]
Best regards, Volker
- Reply
Hallo, ich habe 5 Eve Thermo im Einsatz, alle aus 2020 ( 20EBP1701 ) . Gestern gab es ein Update 1.2.14(1389) für 2 Geräte, die anderen 3 blieben unberücksichtigt. Was hat es damit auf sich und warum gab es dieses Update nicht für alle 5 Geräte.?- Reply
Hallo Peter! Dann sind die drei anderen vermutlich ältere Modell. Öffnen Sie die App Eve und gehen zu Einstellungen > Geräte > Eve Thermo und tippen auf den Rechtspfeil neben ID. Nur bei Geräten, deren Seriennummer mit CM beginnt, handelt es sich um Eve Thermo (2020). Viele Grüße, Volker- Reply
Hi Volker, 1.2.14 ist aber nicht das Thread update, oder? Mein Thermo (2020) taucht nämlich nach dem Update nicht im Thread Netzwerk auf. Gruß, Mike- Reply
Hallo Mike! Nein, das ist nicht das Thread-Update, das kommt später im Jahr. Das stand auch in den aktuellen Update-Notizen. Viele Grüße, Volker- Reply
Hallo, ist absehbar wann Eve Window Guard mit Thread kommt? Grüße...- Reply
Hallo Stefano! Darüber liegen mir leider keine Informationen vor, sorry. Viele Grüße, Volker- Reply
Hallo Volker, supported ihr auch bei Thread Problemen??Viele Grüße, Jörg
- Reply
Hallo Jörg! Klar machen wir das, nur ist das Blog vielleicht nicht der richtige Ort. Support gibt es hier: https://www.evehome.com/de/support/ticketund sonst auch per mail an mich. Viele Grüße, Volker
- Reply
Can an eve energy with thread connect to an eve energy without tread? I have some eve energy’s without thread in a place with bad connectivity, can one eve energy with tread enhance the connectivity for the eve energy’s without tread? By the way, I’m already happy with my eve’s but I think tread wil make me more happy. 😄- Reply
Hello Marvin! Powered Thread accessories like Eve Energy can only connect with other using Thread to widen the Mesh network. Older models are corrected with Bluetooth from the iPhone/iPad or home hub. Have a great day, Volker- Reply
The Eve Light Switch seems like a good choice for a Thread router, given likely hood of multiple placements in various areas. I see that the EU version will be getting an update later in 2021; is there a planned refresh of the US version of the Eve Light Switch sooner rather than later (hopefully 2021, hint hint)?- Reply
Hello Seth! The clear path is Thread. But I don't have any schedule for Eve Light Switch (US) here, sorry. Best regards, Volker- Reply
If I purchase Eve Energy products in the USA now, will they become Thread compatible with a simple firmware update in the future, or should I hold off on buying them at all until a future version of the product?- Reply
Hello John! The actual version of Eve Energy (US) is not capable, the radio for IPv6 is missing on the chipset, a firmware update won't help. The version that starts selling April 6th is. Best regards, Volker- Reply
How does the Eve Home app running on an iPhone "see" Thread devices via the HomePod mini? Are they discovered via HomeKit (and then interrogated via HomeKit calls for various thread properties), or is there some new thread-specific capability that Apple has exposed on the HomePod mini where you can ask it about thread devices it is aware of? It's remarkably hard to find any documentation, since searching the generic term "thread" is lost in the wind on any search engine, especially related to software development.- Reply
Hello Peter! Thread is just another communication of HomeKit enabled accessories besides Wi-Fi and Bluetooth and is is handled by the HomePod mini and HomeKit. Best regards, Volker- Reply
Automation sometimes reacts under one second or after several seconds or not at all. The test setup consists of Homepod Mini, Eve Door, Eve Energy and a Nanoleaf bulb. The Homekit app on both iOS and OSX immediately display door open and door closed. Also clicking on the buttons in the Homekit app immediately switches the Nanoleaf and Eve Energy on and off. So far so good. BUT, I programmed the Nanoleaf and Energy to switch on when opening the door and switch off with door closed and this doesn't work reliably. Unable to figure out why. In the Eve app all 4 components show up in the Thread network.Also without wifi all functionality is halted.
Would this be improved with future software upgrades ? And would Apple in the future produce an Ipod Mini with rechargeable battery ?
Kind regards, Jan
- Reply
Hello Jan! Wi-Fi must always be available of cause from the router. I would reboot the Homepod mini by plugging it iff for a minute then plugging in and wait 5 minutes. In case your automations do not use addition conditions it should work. On a battery powered HomePod mini: this would be a question for Apple.Best regards, have a great weekend, Volker
- Reply
Hallo Volker, das Bild auf dem iPhone hier oben stimmt ja genau NICHT.Der HomePod mini wird nicht als HomePod mini angezeigt, sondern als Router XY.
Haben wir schon unter einem anderen Blog-Artikel diskutiert...
Viele Grüße, Jörg
- Reply
Hallo Joerg! Genau so ist es, in Thread wird der HomePod mini als Router im Raum Unbekannt dargestellt, so kommt es direkt aus Thread. Die Abbildung dient nur der Verdeutlichung. Viele Grüße und schönes Wochenende, Volker- Reply
Hello and thank you for the great article on Thread.But I’m not sure if I am doing anything wrong in my house. I have 10+ Eve Energy devices with up to date firmware supporting Thread network. If I did understand you correctly, any pf those Eve devices should be able to “activate” Thread network and act as the router. However, all Energy devices are reporting Thread’s status as disabled, so there’s no Thread network active.
Now, I’m expecting my new HomePod Minis to arrive in the next few days, and I’m kind of worried that still I won’t have Thread network active.
So, my question is this: what should I do to make my Thread network work?
- Reply
Hello Damir! As of today only the Eve Energy (EU, European version) supports Thread, not the versions in the US or UK. Eve Energy models supporting Thread will be available in the US starting on April 6th and the UK starting on May 4th. Once you have one at home and a HomePod mini the Thread network will set up itself. Best regards, Volker- Reply
So previous models of Eve Energy Bar, or Eve Room will not be thread capable and cannot be made so through a firmware update? Is that the correct read?- Reply
Hello Brian! This is correct. Older models are missing the radio fpr IPv6. As it is a hardware chip missing a firmware update would not help here. Best regards, Volker- Reply
What about Thread on a HomeKit Router? I have Eero Pro router that is a HomeKit secure router with thread support. Will that do anything for me?- Reply
Hello Josh! The Eero router does not support Thread for HomeKit. Eero would have to update the function in the router. But this is a question to ask the Eero guys. Best regards, Volker- Reply
Wird Eve das OpenThread Protokoll unterstützen? Anders gefragt: Kann ich meine threadfähigen Eve-Komponenten mit einem OpenThread Border Router verbinden?- Reply
Hallo Philipp! Der thread Border Router muss auch HomeKit unterstützen in Thread und das macht aktuell nur der HomePod mini. Viele Grüße, Volker- Reply
In the article is a picture of the phone app Thread network feature. What do text colors signify? For example “router” being red on one lamp and green on the other? Thanks.- Reply
Hello Todd! The colors of the accessories in Thread Network are the colors you selected for the room the accessory is in. Best regards, Volker- Reply
When can I expect the 2nd gen Eve Aqua to get thread support? I’m understanding it just needs a firmware update correct?- Reply
Hello Ian! Correct, the 2nd generation of Eve Aqua just needs a firmware update to support Thread. Will be there ready for the watering season, soon. Best regards, Volker- Reply
If I order Eve Energy from the Apple website (I'm in USA) will be certain to have the Thread capability?- Reply
Hello Todd! It will not at all. The current generation of Eve Energy (US) is not ready for Thread. We will be releasing new hardware generations of many Eve devices with Thread support later this year, but unfortunately can't give any further details on when this will be the case for Eve Energy (US) at this time. Best regards, Volker- Reply
I just purchased my first Eve product (Eve Door & Window (2020)) and it's on the way(excited to try it out). What I am curious about is this....in your example above of your settings section of your current thread network its shows the HomePod mini. I currently have several Nanoleaf bulbs that show up in the app but my HomePod mini does not. I know this could be a possible infinite variable question but my two minis does not currently show up. Do you know why?- Reply
Hello J. Estes! The HomePod mini will show up once you have the forst router capable Eve accessory integrated. The only one as of today is Eve Energy (EU). We need one of our Thread capable router accessories to explore and display the complete network. Best regards, Volker- Reply
Hi, my HomePod minis do not appear in third party apps. (Eve, Home + ...) Not in the thread network list, but also not in my accessories list. Is there a solution for that?- Reply
Hello Nico! Two different stories here:1. So far, third parties don't have access to accessories that allow playback like TV-Sets, Apple TVs or the HomePod - Apple (Home) only.
2. The HomePod mini will show up in Thread Network in Eve once a powered Thread enabled Eve accessory like Eve Energy (EU) is present.
Best regards, Volker
- Reply
kann der iPod mini auch direkt einen Endpunkt verwalten oder muss dazwischen immer noch ein Router sein? Wenn ich z.B. in einem Zimmer einen iPod mini und einen Eve Door & Window und einen Eve Thermo betreiben will?In der Darstellung hier ist immer ein Eve Energie dazwischen.
Gruß
Markus
- Reply
Hallo Markus! Das kann der HomePod mini, macht er auch. Ist ein Router wie Eve Energy (EU) dazwischen, wird das Thread-Netzwerk aber auch erweitert, Eve Energy (EU) kann das Signal weiter leiten. Eve Door & Window ist wie alle batterie-betriebenen Geräte immer ein Endpunkt. Viele Grüße, Volker- Reply
Dear Eve,Is Thread going to be supported only on Homepod Mini or any other Homekit hub like Apple TV 4K?
- Reply
Hello Neven! As of today the HomePod mini is the only Thread Border Router for HomeKit. As for other home hubs from Apple, you should ask Apple about their plans. Best regards, Volker- Reply
Warum ist eigentlich aus Bluetooth 5 Mesh nichts geworden? Irgendwann gab es einen Blogbeitrag bei EVE oder Elgato darüber (ich finde ihn nicht mehr), dass ihr das unterstützen wolltet.- Reply
Hallo Norbert! Thread is der Standard. Bluetooth 5 Mesh für HomeKit ist nie verfolgt worden, wird auch nicht mehr. Viele Grüße, Volker- Reply
HalloIch habe mehrere Eve-Produkte „noch nicht Thread Fähig“ mit „2 HomePods und „ 2 AppleTV im Einsatz . Da es wenn auch selten zu Verbindungsprobleme gekommen ist, stelle ich jetzt auch, je nach Verfügbarkeit, auf Thread um.
Aktuell habe ich jetzt 2 HomePod Minis platziert. Und 2 Eve Energy mit Thread-Funktion neu eingerichtet.
Die Installation funktionierte wie gewohnt sehr einfach und das Thread-Netzwerk hat sich sauber aufgebaut.
Bis auf die Benennung der HomePod Minis (Router) die nicht angepasst werden kann ,wie im obigen Beitrag schon beschrieben,
Bin ich sehr zufrieden für die erste Umstellung.
Da die Benennung der Router (HomePod Minis) wohl nur durch das Thread-Netz erfolgt und nicht geändert werden kann,
Frage ich, ob durch Eve nicht einfach ein Bemerkungsfeld in der Eve-App unter Thread bei den Router (HomePod Minis) eingefügt werden könnte ?
Dann wäre alles top aus meiner Sicht
- Reply
Hallo Manfred!Die Daten kommen so aus dem Thread-Netzwerk, daran können wir leider nichts ändern, sorry.
Viele Grüße, Volker
- Reply
Hallo Volker! Seit heute 6.4.21 fällt mir auf, das über die EveApp unter Thread Übersicht, auf einmal in der Anzeige „Unbekannter Raum“ wo meine HonePod Minis stehen ,Auf einmal hinter einem HomePod mini statt der Routerkennung „Router 30 2 wie seither,
Die Benennung : HomePod (Lautsprecher Büro 2) steht ?
Der HomePod mini steht auch im Büro ,wenn auch nur 1Homepod mini
Wird versucht doch die Benennung auf der HomeApp in Thread zu übernehmen ???
Danke im Voraus für eine Rückinformation
- Reply
Hallo Manfred! Ist neben anderen Thread-fähigen Geräten auch ein Eve Energy (EU) dabei, werden HomePod mini in 'Unbekannter Raum' angezeigt und zwar als 'Router'. Die Benennung in der App Home hat leider keine Auswirkung auf die Namensgebung von Thread, darauf haben wir keinen Einfluss. Wenn Du das Thread Netzwerk in Eve öffnest, warte bitte je nach Zahl der Thread-fähigen Geräte etwas, bis alle Daten abgefragt sind. Viele Grüße, Volker- Reply
Would be nice to see a FW update bringing Thread support to the Water Guard since this is connected to main power all the time. Is this planned as well? Bringing support to the Aqua and not the Water Guard seems kind of weird otherwise...- Reply
Hello Mikael!The current generation of Eve Water Guard is not ready for Thread. We will be releasing new hardware generations of many Eve devices with Thread support later this year, but unfortunately can't give any further details on when this will be the case for Eve Water Guard at this time. Best regards, volker
- Reply
No if ONLY Apple would release that HomePod mini here in NL.Had I known I would have postponed those 5 eve lightswitches last year. 🤣
- Reply
Hi, I have 13 Eve Thermo (latest version) 15 Eve Door and Window Sensors (latest version) 1 UK Eve Energy Plug and two homepod minis. I don't see my homepods in the thread Network.Question 1, how do I get my homepod minis to show in the Thread Network?
Question 2, is there a target date for a firmware release for the Eve Thermo to support Thread?
Question 3, is there a target date for a firmware release for the UK Eve Energy to support Thread.
Many thanks, and kind regards
Nick
- Reply
Hello Nick! As stated in the blog post a Thread accessory that can act as a router is needed. The Eve Energy (UK) won't get a firmware update, the chipset on the accessory won't work, it needs a new model. I don't have any information on the upcoming Firmware for Eve Thermo (2020), sorry. Best regards, Volker- Reply
Danke für den Artikel, bei mir wird in der Thread-Network Ansicht unter "Unbekannter Raum" mehre Router angezeigt (zB Router 60, Router A8) aber kein Klartext Name, obwohl alle Eve Geräte einen Namen haben, genauso wie meine 3 HomePod Mini devices.- Reply
Hallo Mike! Die HomePod mini werden als Router angezeigt, alles gut. Mehr Informationen bekommen wir nicht aus dem System. Viele Grüße, Volker- Reply
Leider tut sich der Fortschritt dank Thread-Technologie noch etwas schwer.Von 18 EVE DOOR&WINDOW-Sensoren (Firmware 2.1 (2044)) sind, trotz diverser Thread-Empfänger über das ganze Haus verteilt, 11 nicht erreichbar :-(
[Infrastruktur: zweigeschossiges freistehendes Einfamilienhaus mit ca. 80 qm pro Etage - 3 HomePod-Mini (1x EG, 2x OG) - 4 HomePod (2x EG, 2x OG) - 2 AppleTV (1x EG, 1x OG)]
Gesamtübersicht siehe Screenshot unter: bit.ly/2Zo8Pc5 und bit.ly/3asdz71
Die DOOR&WINDOW-Sensoren verlieren ohne erkennbaren Grund den Kontakt und blinken auch nicht mehr beim Öffnen und Schließen der Fenster. Die Batterien sind voll (Betrieb bisher nur ca. 3 Monate - auch wenn ein Sensor behauptet seine Batterie sei leer, auch das ist eine Besonderheit, die von Zeit zu Zeit bei den Sensoren auftaucht. Nachgemessen sind alle Batterien gleich voll und nach dem Neueinsetzen verschwindet diese Meldung auch) und die Funktion der Sensoren kann durch kurzzeitige Stromunterbrechung erneut hergestellt werden …
... bis sie ohne Grund erneut die Verbindung verlieren.
Thread hat bei uns bisher zu mehr Problemen mit den Sensoren geführt als wir in der Zeit vor Thread je hatten.
- Reply
Hallo Marcus! Bei der Zahl der HomePod mini müssten die Geräte erreichbar sein. Sie haben keine Eve Energy (EU, 2020) dabei? Viele Grüße, Volker- Reply
Hallo,ich überlege meinen Gerätepark Thread Fähig zu machen, sobald ein Thread fähiger Apple TV auf den Markt kommt.
Wird es eine Aktion von Eve geben, bie den Umtausch der Eve Geräte "belohnt", also "alt gegen neu" .
Wenn ja, müssen die alt- Geräte Mindestanforderungen erfllen?
Wird die Aktion zeitlich befristet sein?
- Reply
Hallo Manu,es wird leider keine Tausch-Aktionen geben, sorry. Viele Grüße, Volker
- Reply
Hallo Volker,ich habe im ganzen Haus Lichtschalter durch den Eve Light Switch ersetzt. Die Schalter funktionieren gut, auch wenn es gefühlte Schaltverzögerungen gibt. Ich habe gehört, dass es demnächst den Eve Switch mit Thread geben soll und ich überlege, ob ich umstellen soll. Meine Frage: Reicht es später aus nur das Schaltmodul (der Controller mit den Beinchen) auszutauschen, oder muss ich wieder einen Elektriker bemühen, der alle Schalter ausbaut und neue einbaut?
Gruß Detlef
- Reply
Hallo Detlef, die Geräte müssen dann leider komplett ersetzt werden, sorry. Viele Grüße, Volker- Reply
Das liest sich gut und ich werde wohl mit meinem Kauf noch etwas warten. Da ich mir jetzt gerade das Gerät "Eve Door & Window " zulegen wollte, würde mich sehr interessieren ab wann man und wo ich mit der neusten Hardwareversion rechnen kann? Ich kann die leider nirgends finden- Reply
Hallo Thorsten! Es gibt das Eve Door & Window als Thread-fähige Version, https://www.evehome.com/de/identify-your-eve-accessoryViele Grüße, Volker
- Reply
Sehr guter Beitrag! Gibt es denn schon Infos, wann das Thread Update für die Eve Thermos kommt?Ich bin vor ca. einem Monat aus dem Grund von Tado zu Eve gewechselt und warte nun.. :)
- Reply
Hallo Fabian! dazu haben wir leider noch keine Information, ich warte selbst. Viele Grüße, Volker- Reply
Hallotop Erläuterung zur Thread Funktion!
In der ersten Märzwoche kommt der HomePod Mini, dann lege ich auch mit Thread los,
bin schon gespannt...
Gruß Jörg
- Reply
It would be very useful if your website clearly marked which of your products support Thread today and which will support it in the future – either by firmware update or by a new model.- Reply
Hello Scott! As of today Eve Energy (EU, 2020) and Eve Door & Window (2020) already use Thread. Eve Aqua (2020) and Eve Thermo (2020) are ready for Thread, they need a firmware update. The rest needs a model update. Please check our listing here: https://www.evehome.com/de/identify-your-eve-accessoryBest regards, Volker
- Reply
What about non-HomeKit Thread devices? Do they form an entire parallel Thread network? Or is there a way Thread can build up a mesh of devices that are agnostic to HomeKit so they at least build a strong mesh, and just use the appropriate Border Router to get out?- Reply
Hello! The accessories not using Thread use either Bluetooth or Wi-Fi - in both cases no Thread network. Best regards, Volker- Reply
I meant non-Eve non-HomeKit devices, but that support Thread. For example, Google has devices that support thread. Obviously they do not and will not support HomeKit.So if I have Google Thread devices, is there an entire parallel Thread network in my house?
Or do the two Thread networks help extend one another, and just use the HomePod Mini as the router for the Eve HomeKit Thread devices?
- Reply
Hello! They just don't know of each other, sorry. So far both exist parallel. Best regards, Volker- Reply
This is one interesting article! I don’t have any eve products but seeing you guys are posting stuff like this makes me curious. Going to order me some sensors and sockets to play around with.- Reply
Hello Jev! As of today only Eve Energy (EU) and Eve Door & Windows support Thread, both models 2020. The hardware in Eve Thermo (2020) and Eve Aqua (2020) is ready to go just needs a firmware update. Please check our listing here: https://www.evehome.com/de/identify-your-eve-accessoryBest regards, Volker