Product Features | Eve Thermo
Eve Thermo Adapter
Mar 30, 2019 - by Volker - Comments
 
 

Like other thermostats, Eve Thermo comes with a standard M30x1.5 connection for your heater’s valve. In addition, the box contains RA, RAV and RAVL adapters for Danfoss heaters. Eve Thermo can easily be connected to over 90 percent of all radiators without requiring any type of adapter. Only those who have very old radiators in their homes or who use unique solutions require adapters to connect Eve Thermo to their radiator valves.

 

Those looking for a suitable adapter to connect Eve Thermo to a very old or rare heating system can find information on valves and adapters at Energenie UKHeating Controls Online or Conrad UK.

 

Eve Thermo is made in Germany by EUROtronic, which specializes in heating controls.

Oventrop valve without support for motor-driven TRVs

Adapter connecting Oventrop valve to Heimeier with support for motor-driven TRVs

Mounted adapter

Eve Thermo working with an adapter

53 Comments
David
Hello, I'm planning on fitting the Eve Thermo to another radiator and it has 1/2 written on it and also F-8164. I can't tell what company the valve is from but the logo looks like the pi symbol. Which adapter would I need for such a radiator please? Thank you, David
Reply
Nov 28, 2021
Hello David! In case this is an on/off valve as the other you have, it needs to be replaced by a plumper. We recommend betting ist replaced with a valve that hast the standard connector M30x1.5. Best regards, Volker
Reply
Nov 29, 2021
Hi Volker, I had a plumber come today to look at my radiators. He said he could change the joints for me to M30x1.5 but he said it wasn't guaranteed that the Eve Thermos will work with the radiators even after that. I don't know why he said that, he didn't seem to be a fan of smart thermostats. I'm not sure if he had encountered Eve Thermos before.
Is there any reason why the Eve Thermo wouldn't work well with our radiators after we change the joints to M30x1.5? Our heating here is collective, so the water is the same temperature for all of the building (apartment block). I think the thing that controls the temperature is the amount the water that flows through the radiator, and that's controlled via the screw tap on each radiator. Thank you, David
Reply
Dec 2, 2021
Hello David, as most modern thermostats als almost all smart thermostats use M30x1,5 valves it is a clever move to get tehm replaced. Best regards, Volker
Reply
Dec 3, 2021
David
Hello, I have a radiator valve with "SAR 1/2" written on it. I understand this radiator company is old and now Euromap Comap now makes the valves for it.
Here are two photos of the valve, one of the photos has a small metal adapter that I currently have on the radiator. I'm not sure of it's function but I can take it off:
https://imgur.com/a/cUPWZYq
There are two threads. The largest screw thread is 29mm and the smallest thread is 19mm. The distance between the end of the largest thread and the tip of the valve is about 3cm. The nut on the metal adapter I removed in one of the photos is 2cm in diameter. I measured all of that myself so it might be a millimetre or so off.
If you know what I need to get to fit the Eve Thermo on I'd appreciate the info! And also, in my photos you see the valve I've got. Do I need to take that off at all? Or does the adapter I will buy just fit on top of that?
Thank you, David
Reply
Nov 28, 2021
Hello David! Thanks for the photo. You need to get the valve replaced with one suitable for Thermostats. The one you have is not it is just an on/off wheel. Best regards, Volker
Reply
Nov 29, 2021
Paul
Hi,
I have a Westherm Four TVR, on a Comap value, and am struggling to find the correct adapter.
Are you able to advise which adapter I need. Thanks, Paul
Reply
Nov 23, 2021
Hello paul,
in case the Westherm is an M28x1,5, this would be the adapter you need:
Westherm M28x1,5 to M30x1,5
https://www.heatingcontrolsonline.co.uk/28mm-trv-adaptors-p-386.html
Best regards, Volker
Reply
Nov 24, 2021
Hi Volker, Thank you that has worked perfectly. Paul
Reply
Nov 27, 2021
Ole Sunaersson
Hi Volker,
I have a Giacomini valve. Do you know which adapter I need?
Thanks, Ole
Reply
Nov 21, 2021
Hello Ole,
according to my lists, this should do the job:
Giacomini to Heimeier M30x1,5
https://www.amazon.de/Adapter-Heimeier-Giacomini/dp/B0028Y1RM6
https://www.meinhausshop.de/HEIMEIER-9700-33.700-Adapter-fuer-Giacomini-Ventile
Best regards, Volker
Reply
Nov 22, 2021
Thanks for your shift reply Volker, I will check that out. Ole
Reply
Nov 22, 2021
Sasan Seyedein
Hi,
My radiator has Danfoss RA-N (013G0013) valve. Does any of included adaptors is matched with it?
Bests,
Reply
Nov 13, 2021
Juz
Hi, Can these be mounted vertically?
Thanks.
Reply
Nov 12, 2021
Hello Juz! Yes you can and you may even want to flip the display. In Eve open Settings > Accessories > Eve Thermo > Installation and select Inverted. Have a great weekend, Volker
Reply
Nov 13, 2021
Paul
Is this compatible with the RA 2000 or would I need an adapter?
Reply
Nov 9, 2021
Hi Paul, I would guess you need an adapter, I do have this in my list, it's a germal URL, the only one I have:
Cosmo with Danfoss RA 2000 to M30x1,5
https://www.hs-ersatzteilshop.de/Heizung/heizungstechnik/product-2691.html
Best regards, Volker
Reply
Nov 9, 2021
Mate
Hi, I have just installed new radiators and as I can see, I have Herz valves installed. Can I use Eve Thermo on Herz Valves?
Thank you,
Mate
Reply
Oct 27, 2021
Hello Mate! Yes you can, but you will need an adapter as Herz valves have M25x1,5 and the standard is M30x1,5.
The following will fit;
Herz M28x1,5 auf M30x1,5
https://www.amazon.de/gp/product/B0028YCQNA/
https://www.wolf-online-shop.de/HEIMEIER-Adapter-fuer-Herz-Ventile::666.html
These are german URLs but you will find out. Best regards, Volker
Reply
Oct 28, 2021
Miklos
Hello! Unable to install EVE on my German home radiator. Can someone help to identify the needed adapter, please? Thank you so much for all your help 🥲
Valve: https://ibb.co/wNG9P6w
Control: https://ibb.co/ss8tFc8
Reply
Oct 15, 2021
Hello Miklos!
Please open a support ticket:
https://www.evehome.com/en/support/ticket
and let us know there the manufacturer name printed on the old, manual thermostat.
Best regards, Volker
Reply
Oct 16, 2021
Erika Lakó
Hi Volker, We have bought an EVE THERMO Smart Radiator Valve, Apple HomeKit (Chipset 2020).
I would like to ask you where can we buy adapter for this kit.
We would like to buy a RAVL adapter
Thank You, Regards, Erika
Reply
Oct 8, 2021
Hello Erika! An adapter for Danfoss RAVL is part of the adapter set we ship Eve Thermo with. It is the small adapter without a screw to fix on the left hand side. Best regards, Volker
Reply
Oct 8, 2021
Shehzad Mohammad
Hello there, I have an old radiator that im trying to fit the adaptor in but it's too big for it.
The drayton TRV (BS6284)that I've taken out is 28mm and too big for the Eve TRV. I have tried the attachment but it doesnt fit. Any idea which one i need to buy?
Reply
Sep 1, 2021
Hello Shehzad Mohammad! The provided adapters are for Danfoss valves RA, RAV and RAVL only. Drayton needs another adapter. The Drayton TRV 4 does not need an adapter at all, your seems to. Are you sure it is 28mm? I only found one that comes with M27 x 1,0? You may want to contact me at [email protected]
Best regards, volker
Reply
Sep 2, 2021
Bas Steenman
Hi,
I got a problem when I install my eve. It fit on the valve but it’s to lose. En won’t work. I’ve got this valve https://ibb.co/1GTHYmw. Is there somebody that knows what adapter I need to use? Thanks for helping
Reply
Feb 9, 2021
Hello Bas! This is more a support question. With more than 70 valves is the market it is not easy to find our by a photo. Please use email to [email protected] and send me the name that is printed on the old manual thermostat. Best regards, Volker
Reply
Feb 9, 2021
Yannick
Hello,
I have issues fixing the thermostat.
My current thermostat has an M28x1.5 connector from COMAP.
https://www.comap.be/sites/benelux/files/field/media/files/00014_2020-11_frf_prodatsh_tete-thermostatique-sensity_comap-c.pdf
I tried every adapter I found in the box and I can't make it fit with the Eve Thermostat.
Do you have an adapter for M28x1.5 ?
Reply
Feb 1, 2021
Hello Yannick! The adapters provided are for Danfoss RA, RAV and RAVL only. You need an Adapter M28x1,5 to M30x1,5. I only have a URL for the German store, but you should find it where you live.
https://www.amazon.de/Heimeier-Adapter-Thermostate-M28x1-M30x1/dp/B00VEA3R1Y
Best regards, Volker
Reply
Feb 2, 2021
cedric
Bonjour, je n'arrive pas a installer eve thermo sur mon radiateur, les adaptateurs fournis ne semblent pas me permettre de visser le tête thermostatique dessus

Reply
Jan 11, 2021
Bonjour. Nous ne fournissons que les 3 adaptateurs les plus utilisés sur le marché (Danfoss RA, RAV et RAVL). Contactez le support technique sur evehome.com pour obtenir d'autres listes d'adaptateurs.
Reply
Jan 12, 2021
Jassim Lamrabti
Good day,
Just got my new eve termo but it won’t connect to my valve, could you help me finding an adapter for this valve.

best Regards

Foto of valve :
1.
https://share.icloud.com/photos/01RcKiZ0gDChhRTceiLo14wsA#Marienborn
2.
https://share.icloud.com/photos/0HvC_LRezcbPUMRFh6POhgxmA#Marienborn
Reply
Dec 30, 2020
Hallo Jassim! You can't see it by looking the valve. Please send me an email at [email protected] and let me know the manufacturer name that is printed on the old manual thermostat. Best regards, Volker
Reply
Dec 31, 2020
Normunds
Hi! Is thermostat compatible with Purmo valves? https://www.purmo.com/en/products/panels/compact.htm
Reply
Dec 29, 2020
Hello Normunds! You'd need to check for the valve used there. Eve Thermo comes with a standard connector M30x1,5 and adapters für Danfoss RA, RAV and RAVL. Best regards, Volker
Reply
Dec 31, 2020
Dominik
Hello,

I just bought 4 Eve Thermo (Second generation) and tried to install them on my heaters. I am using a M30x1 to M30x1.5 adapter from Oventrop (bought on Amazon.de, metal version, should be the first listing at the top).

Eve Thermo starts calibrating, you can hear the valve opening and closing but it always fails at about 75% of the progress bar giving me a „general installation error“. Resetting did not help either.

Any ideas that could get these things running? I can provide pictures of my heater when needed.
Reply
Oct 14, 2020
Hello Dominik!
This should not happen if the adapter is the correct one for the valve on your heater. Are you sure the adapter you got is the correct one? What was the manufacturer name on the old manual thermostat? You may want to contact me by mail at [email protected] to not open an ongoing thread here. Best regards, volker
Reply
Oct 15, 2020
Tero
I have bought 6 eve thermo. We replaced piping and valves for our house. Brand new valves are danfoas RA-N models. I get constant E1 calibration error. I tested these before piping work, we had danfoss ravl valves and only one radiator I was able to calibrate thermo at that time, didnt spend much time thinking this as new valves were coming. But now still e1 error from multiplw valves and thermos.
Reply
Sep 16, 2020
Hello Tero!
For a RA-N valve you need a special adapter to M30x1,5. No way using the provided ones, they are only for Danfoss RA, RAV and RAVL.
Best regards, Volker
Reply
Sep 18, 2020
Hi Volker, i am going to install 4 Eve Thermo valves from Danfoss RA-N so you are saying they are not in the box? That part do i need to buy?
Thanks, Stefan
Reply
Mar 15, 2021
Hello Stefan! Eve Thermo comes with the standard M30x1,5 and we provide adapters for Danfoss valves RA, RAV, RAVL. The RA-N valve needs a different adapter, only have a german URL here:
Danfoss RA-N auf M30x1,5
https://www.meinhausshop.de/Adapter-fuer-Danfoss-Ventile-RA-N-ersatz-fuer-Jung-A110
Best regards, Volker
Reply
Mar 16, 2021
Hi Stefan,

Did you try eventually? I did, and the included RA adapter did actually fit the RA-N valves.
Reply
May 18, 2021
Shane
I have purchased 7 of these eve-thermo's 2 of them fit my floor level radiators without issue however the thread on the wall mounted radiators and the full wall bathroom radiator they dont the thread is too big if I use the smallest of the 3 adapters then the thread is too big
Reply
Sep 5, 2020
Hello Shane!
Please check for the brand name printed on the old manual thermostat. It will give you a hint what adapter is to be used. You may also contact me at [email protected]
Best regards, volker
Reply
Sep 7, 2020
Tóth Norbert
Hello! I would like to ask if eve thermo is compatible with this radiator valve? Or do I need to replace the valve?

http://kepkezelo.com/images/2xgghle35gec9utny1fm.jpeg

https://www.apple.com/hu/shop/product/HNRD2ZM/A/eve-thermo-intelligens-radi%C3%A1torszelep
Reply
Aug 31, 2020
Hello Tóth!
I don't know any adapter that would fit here. I would gon for a new valve at best with the standard M30x1,5.
Best regards, volker
Reply
Sep 2, 2020
Norbert, Your valve can't work with connected valves as it seems to be an old manual one which must be opened/closed by turning the button by the hand. That kind of valves must be replaced by thermostatic ones.
Reply
Dec 30, 2020
Mark
Hi Volker,

thanks, this did it!!!

actually all I needed to do was step 7+8

This situation happened with three valves. Worked and calibrated last year, not this year...

Nice work around.... I was slowly thinking I needed other adapters....

Anyway thanks a lot !!!!

best
Reply
Aug 30, 2020
Hey Mark, glad it worked, I was pretty sure it will.
This just happens.
I wich you a great start into the week, Volker
Reply
Aug 31, 2020
Mark
I had Eve thermo working last year, now the batteries were dead so I replaced them. Now it will not calibrate anymore...

What to do?
Reply
Aug 29, 2020
Hello Mark,
Please try the following step-by-step procedure including the trick with the 2 cent coin. We have recently learned that around 10% of the valves used in Germany have a slightly too small stroke, the coin compensates for this.

1. Delete Eve Thermo from Eve app
2. Un-mount Eve Thermo and make sure that you can move the valve on heater side (if not use grease and eventually hit the valve's body with a hammer to solve the problem)
3. Put new batteries in Eve Thermo ("Er" means either calibration problem or discharged batteries)
4. Press one of the arrow on screen until "Er" disappears (the screen will then show "no", which means "mounting" and the valve will move to a correct mounting position)
5. Hard reset Eve Thermo until the 66/99 appears on the LED.
6. Re-pair Eve Thermo in Eve app and follow instructions to mount it and calibrate it.
7. Insert a 2 cent coin into the valve holder of Eve Thermo.
8. Follow the assembly and calibration instructions.

If the code ER does not appear on the display of the Eve Thermo during step 4, please skip this step.
Reply
Aug 30, 2020
argo
Hi!

Where to buy this adapter?

Argo
Reply
Jun 9, 2020
Hello Argo!
Depends on the valve the heater is using. Most customers search at Amazon or other places. You need to search for M30x1,5 and the valve name you have. Best regards, volker
Reply
Jun 9, 2020
Add new comment