Product Features HomeKit | Eve Aqua
All features of Eve Aqua
Aug 3, 2022 - by Lars - Comments
 
 

Eve Aqua is a slick piece of hardware with software that takes ease of use to the next level. This feature-packed solution is effortless to fit, and makes it a breeze to connect your irrigation system to your HomeKit home.

 

The smart water controller screws on securely to your outdoor faucet, and thanks to the accessory's standard 26.5 mm / G ¾" thread you can fit regular hose pipes and other popular hose systems (such as from Gardena or Kärcher) with ease using the supplied hose connector. 

Eve Aqua has a single onboard button, which starts or stops the flow of water at a touch. Touch it once and the valve will open. Eve Aqua will then shut off the flow of water automatically after a set duration, which you can customize in the Eve app – a really easy way to water your lawn without wasting precious water. Eve Aqua is also equipped with HomeKit technology, plus enough memory to store sophisticated schedules. This means you can start watering using your iPhone or by asking Siri – and if you've got a home hub, you can even do so while on vacation. You can also go one step further and use the Eve app to add schedules which are then stored on Eve Aqua – you've then got yourself a fully automated irrigation system.

 

The latest generation of Eve Aqua supports Bluetooth and Thread, and joins your Thread network automatically. Thread makes your smart home network more responsive, robust, and increases its reach – the only thing else you need is HomePod mini. You can even add Thread support to your latest-generation Eve Aqua simply by updating the accessory’s firmware. Discover if your Eve Aqua can support Thread by visiting www.evehome.com/identify.

 

Fit and get ready for use

You can fit Eve Aqua to virtually any regular outdoor faucet. Just ensure you screw the accessory all the way on to the faucet using your fingers and that it is fitted securely to prevent leaks. 

 

To insert or change the batteries, use your thumbs to push down gently on the ribbed surface on the bottom of Eve Aqua and then slide the cover forward. The ribbon makes it easy to remove the batteries – just wrap it around them and tuck it fully into the compartment before closing the cover. If you leave it dangling outside, it can cause moisture to enter the housing and the battery compartment. Watch the installation video.

At the end of the gardening season, protect Eve Aqua, as you would do for most non-fixed irrigation products, against frost to avoid damage being caused to the moving parts, seals and fixings. It's best to unscrew Eve Aqua from the faucet, give the accessory a clean, open the valve, remove the batteries and allow everything to dry out nicely before putting it away for the winter.

 

With a standard thread, hose connector and ability to withstand a wide water-pressure range (anywhere between 1 bar/14.5 psi to 5 bar/72.5 psi), Eve Aqua is perfect for use with all regular irrigation systems. You can also fit it to a twin-tap connector, among other types of multi-channel distributors. With this setup, Eve Aqua is always supplied with water – and you still have one outlet free to hook up your regular hose. The possibilities truly are endless. Keep reading for further examples, such as how you can use a Gardena multi-channel distributor or even a micro-drip system for your patio plants with Eve Aqua.

Set up Eve Aqua

To launch the setup process, open the Eve app and go to Settings > Add Accessory. Scan the HomeKit code, add a unique name and assign the accessory to a room – before you’ve even had time to say "how did I ever manage before Eve Aqua?", the setup process will be complete. As you'll have already assigned Eve Aqua to a room, browse for the accessory in the "Rooms" view and tap on the name you gave Eve Aqua. The detail view of Eve Aqua brings all the key control elements together in one single command center for you:

An on/off switch, schedule control and editor, irrigation history, the default duration picker for configuring how long you want the valve to remain open, estimated consumption and automation overview.

Tap the on/off switch and the valve will open for the length of time set under Default Duration. Expand the Last Watered field and you'll see a timeline. It shows you when the valve was last opened along with a handy export option that you can access by tapping the list icon.

The Estimated Consumption field also includes supplementary historical data. This shows you how much water you've been consuming each day. While not a precise measurement, it provides you with a good estimate based on the value you've set in the Eve app under Settings > Accessories > [Eve Aqua] > Flow Rate.

Default Duration and Schedules

 

Eve Aqua is categorized as a "Sprinkler" within HomeKit. This means that the Home app offers a large virtual switch that allows you to choose between "Running" and "Off" as well as select the default run time in the settings. The duration you select determines how long the sprinkler runs for when you press the button on Eve Aqua, tap the switch in the app to set it to "Running" or ask Siri to start watering. You can also set this value using the Eve app or even by asking Siri, such as by saying "Set Sprinkler to 10 minutes".

Take practicality and ease of use to a whole new level by using schedules, as they allow Eve Aqua to operate autonomously with no manual intervention required on your part and no need for your iPhone or home hub to be nearby. You simply add them in the Eve app and send them to Eve Aqua where they're stored. This means that Eve Aqua always runs the schedule autonomously. The big advantage: your Eve Aqua will turn on and off automatically independently of a network or internet connection. 

 

In the detail view of Eve Aqua, tap the gear icon on the bottom right of the Schedule segment. Now add a program and then select which days of the week you want it to run. Following that, add up to seven watering times (for further details, see our blogpost "Automatic multi-zone lawn and flowerbed irrigation made easy"). Here are three examples for a range of scenarios:

Water your balcony plants at the same time every day: The best time to water your balcony plants is in the early morning when the plants aren't in the sun yet and the soil is still cool. To do that, select every day of the week, set the watering time to two hours before sunrise and choose a suitable duration.

Water your lawn twice a week: Your lawn doesn't need watering every day – depending on the type of soil you have, two to three times a week is sufficient. However, when you do water your lawn, ensure the roots get a good soaking (wet the soil down to 15 cm/5"). To achieve this, be sure to set a long enough watering duration.

Water your flower beds and lawns: If you need to water different sections of your garden, and each has very different irrigation requirements, you need an automatic multi-channel distributor. To learn how to best control this using Eve Aqua, see our blogpost "Automatic multi-zone lawn and flowerbed irrigation made easy".

Pause watering if the weather's about to turn bad 

To avoid wasting water, you should pause watering if the weather is going to do the job for you. The Eve app will help you do this, and save you from the hassle of having to first turn off schedules and then turn them back on again manually. To do so, in the detail view of Eve Aqua, tap the gear icon in the Schedule segment. Now tap Exceptions > Schedule Suspension and then turn on the Add to Suspension Scenes option in the following dialog. You can now respond quickly to weather changes and pause watering for the current day and/or for the next day too.

By long-pressing the Eve Aqua tile in the At a Glance view or the Eve Aqua entry in the assigned room in the Rooms view, you can access the context menu where you can pause watering for the current and/or next day. Your schedule will then run again as normal following that.

If you drag the watering pause scenes in the Eve app under Automation > Scenes to the first two positions, you can even turn them on by long-pressing the Eve app icon on your Home screen.

In conjunction with Apple's Shortcuts app, version 4.4 of the Eve app lets you pause Eve Aqua automatically depending on the weather forecast. All you need to do to use this great feature is install a specially prepared Siri shortcut via the Eve app. For further details on how to configure this feature, see the blogpost "Suspend your watering schedule based on the rain forecast".

 
 

Increase the reach of Eve Aqua

Add HomePod mini to your home and your Thread-enabled Eve Aqua (2nd generation) will be able to communicate via Thread – the mesh network that reaches even the farthest corners of your abode. This happens automatically without you needing to configure anything. Simply position a Full Thread Device, such as Eve Energy, as close as possible to your Eve Aqua. The Eve Energy accessory will then act as a router node and relay data packets from Eve Aqua.

 

To view the structure of your Thread network and see where you can make improvements, simply go to the Settings area of the Eve app and tap Thread Network. Among other things, you’ll be able to tell which node Eve Aqua uses to communicate and whether you can further improve the stability and reach of your network and accessories by using an additional router node – such as by adding one more Eve Energy or moving one to a better location.

 

 

And the features keep on coming... 

To fine-tune the Estimated Consumption measurement in the detail view of Eve Aqua, enter as accurate a value as possible in the Eve app under Settings > Accessories > [Eve Aqua] > Flow Rate. To calculate your flow rate, use a water meter. Alternatively, the easiest way is to take a bucket or container (whose volume you know) and time how long it takes to fill it with water output by all the components of your irrigation system. Then simply divide the volume by the time it took. 

 

The Child Lock is another key feature in the accessory settings. Once turned on, it disables the button on the front of Eve Aqua so nobody can go playing practical jokes with your sprinkler.

Smart Water Controller
Learn more
 
Supports Thread
Shop now
Your Choice
Shop now
incl. VAT, plus shipping
Your Choice
Select your country
Connected Weather Station
Learn more
 
Supports Thread
Shop now
Your choice
Shop now
incl. VAT, plus shipping
Your choice
Choose your country
Smart Plug & Power Meter
Learn more
 
Supports Thread
Shop now
Your Choice
Shop now
incl. VAT, plus shipping
Your Choice
Select your country
104 Comments
Ben Deller
I have an Eve Aqua unit and an Eve Window/Door sensor and want to be able to pause the watering schedule if the window is open. How would I create a condition for this?
Reply
Nov 9, 2022
Hello Ben! The trigger would be opening the window and the screen to turn off Eve Aqua. Best regards, Volker
Reply
Nov 9, 2022
Philippe Herve
Did anyone find the bad weather exclude feature mentioned in the help file?
Reply
Oct 21, 2022
Hello Philippe, please check the paragraph on "Pause watering if the weather's about to turn bad " in this post. Best regards, Volker
Reply
Oct 25, 2022
Reggy Mac Gillavry
Hello, I have the Eve Aqua and the Eve Weather. Is it possible to suspend watering depending on a weather forecast of the Eve Weather? If yes, how to setup this.
Reply
Sep 9, 2022
Hello Reggy! You may set an automation with the weather trend from Eve Weather as a trigger to not water. But this is only a trend, based on the barometric pressure of the last 12 hours. Best regards, Volker
Reply
Sep 10, 2022
aldov
Eve Aqua I have is on a presssured line with a float valve at the end. While Eve Aqua is scheduled to release water into the pressured line w/ float valve 2 times a day for 10min interval, it does not accurately count the water consumption. I am topping off a 50 gall fish pond after evaporation with is about 5 gallon worth of water twice a day. Eve Aqua inaccurately measures that amount and time and indicates 95 gallons water consumed twice a day.

The fish pond is only 50 gallons, and there are no leakins in my water line.

Device works as expected (after I added Mini-home), except for measuring water consumption accurately.
Reply
Sep 5, 2022
Hello Aldov! Eve Aqua does not measure the water flow, sorry. Using a water flow meter (starting at USD $20) is the most convenient way. Alternatively, use a measuring bucket to collect a minute’s worth of water from each outlet in your system. Once found out set it in the app Eve in
Settings > Accessories > Eve Aqua > Flow Rate
Best regards, Volker
Reply
Sep 6, 2022
Kara C
On the US-specific webpage for Eve Aqua < https://www.evehome.com/en-us/eve-aqua > the little video in the middle of the page uses French language titles for information about the product. Surely there's an English version available? Thanks!
Reply
Aug 2, 2022
Hello Kara! The Eve aqua is US of cause. The US version comes with the specific thread used in the US. Best regards, Volker
Reply
Aug 3, 2022
Sean Katz
can Eve Aqua work with gravity fed water? or is there a minimum pressure to make the valve work?
Reply
Aug 2, 2022
Hello Sean!
Eve Aqua needs a Water Pressure: 1-5 bar / 14.5- 72.5 psi / 100-500 kpa
Best regards, Volker
Reply
Aug 3, 2022
Richard
Can this send an alert or notification if it detects a leak/increased flow on a irrigation system, e.g. if a pipe pops off.
Reply
Jul 30, 2022
Hello Richard! Unfortunately HomeKit/Apple does not provide this so we can't either. Have a great weekend, Volker
Reply
Jul 30, 2022
Randy
Hallo Volker,
wir nutzen nun Eve Aqua seit zwei Jahren sehr erfolgreich und bewässern damit unsere Terrasse. Nun ist unsere Terrasse sehr gross und wir benötigen einen 6fach-Verteiler von Gardena, welchen wir bis anhin auf drei aufteilten. Jeder Schlauch kriegt für 3min Wasser, dann wechselt der Verzeiler den Schlauch - drei mal Morgens und drei mal Abends gibt 6 Programme. Nun ist Ece Aqua auf 7 Programme limitiert, könnte man dies erhöhen? Wir würden gerne 4 Schläuche damit Bedienen, die Aternative wäre auf ein Gardena System umzusteigen.
Reply
Jul 23, 2022
Hallo Randy! Das geht technisch leider nicht, bei Zeitplan ist bei sieben Bewässerungen Schluss. Du kannst natürlich Automationen nutzen mit der Zeit als Auslöser und Bewässerung in der Szene. Das machen viele Kunden mit Gardena 6-fach Verteiler, um zweimal sechs Bewässerungen am Tag zu haben. Viele Grüße, Volker
Reply
Jul 24, 2022
mike
Hello, Can a trigger within homekit be used to turn on the water? To be exact, I am looking for any Homekit compatible motion sensor that can turn on the water. Furthermore, it seems the aqua is out of stock. Any ETA on availability or is it being discontinued?
Thank you.
Reply
Jul 19, 2022
Hello Mike! Sure you can use a motion Ensor like Eve Motion as a trigger for Eve Aqua watering. Eve Aqua should be in stock again within a few weeks. Best regards, Volker
Reply
Jul 20, 2022
Rolando Mota
Is there a procedure for updating firmware in Eve devices, or is that some thing that’s done automatically from the app?
Reply
Jul 18, 2022
Hello Rolando! In case a firmware update is available you will be noticed in the app Eve, look for a red dot above Settings in the tab bar and follow. The update won't happen automatically, you have to start the process in Eve manually. Best regards, Volker
Reply
Jul 19, 2022
Pau
Hi,
Could Eve aqua be used for nebulizing? That would need an irrigation program of less than 1 minute, repeated for example every 15 min and scheduled between 11am and 6pm.
Would that be possible using only Eve Aqua, or is it needed a HomePod Mini ...

Thank you!
Reply
Jul 12, 2022
Hello Pau! The function Schedule allows 7 waterings per day. As you need more a home hub is mandatory like a HomePod mini. You may then set up the automations you need with the time as the trigger. Best regards, Volker
Reply
Jul 13, 2022
Rodrigo Borges
I bought 2 products and one of them came with the internal thread groove already worn out. Is it possible to change only this part, so that it fits perfectly into the faucet?
Reply
Jul 7, 2022
Hello Rodrigo! As there are no spare parts for Eve Aqua please get the accessory replaced by the retailer. Best regards, Volker
Reply
Jul 8, 2022
Klemens
Hallo Volker,

kann man Eve-Aqua auch für Warmwasser verwenden und wenn ja, was wäre die maximale Temperatur?
Beste Grüße Klemens
Reply
Jul 3, 2022
Hallo Klemens! Es funktioniert auch mit Warmwasser, maximale Temperatur ist 50 Grad. Viele Grüße, Volker
Reply
Jul 5, 2022
Stefan
Hallo Volker, gibt es eine Möglichkeit, ein optisches oder akustische Signal (oder anderes Feedback) aufs iPhone zu erhalten, solange Eve Aqua läuft. Das würde einem ein sicheres Gefühl geben?
VG Stefan
Reply
Jun 20, 2022
Hallo Stefan! Leider bietet das HomeKit nicht, also können wir das leider auch nicht, sorry. Viele Grüße, Volker
Reply
Jun 20, 2022
Buck
What is the bluetooth range of the Eve Aqua? If you get out of range, does it close the valve?
Reply
Jun 16, 2022
Hello Buck! The Bluetooth range to the iPhone or home hub is 6-8 meters / 20-25ft. In case you are using the latest model and a Thread Border Router (HomePod mini and/or Apple TV 4K 2nd generation) it will connect using Thread with more range. Leaving / arriving in range has no effect on the valve status. Best regards, Volker
Reply
Jun 17, 2022
Eric
Hi,
Is it possible to have 2 Eve aqua in the same home ?
Thanks
Reply
Jun 5, 2022
Hello Eric! This is not problem at all. I would recommend then for better finding both (or more) in the app Eve or Home to set names like Eve Aqua left or right or backyard and so on. Best regards, Volker
Reply
Jun 5, 2022
Anne Kochendorfer
It would be nice to have the ability to program to water on odd or even days of the month. Many municipalities regulate when you can water lawns based on your house number and odd/even days of month.
Reply
May 22, 2022
Hello Anne! I have forwarded your request to the developers, thank you very much! Have a great start into the new week, best regards, Volker.
Reply
May 23, 2022
Chris
Dear Volker,
the Eve Aqua unfortunately breaks very easily at the connection point to the water inlet. I have already broken 2 devices within a year. Will there be a product update and if so when?
Thank you very much!
Reply
May 16, 2022
Hello Chris! Sorry, but I can't talk about future product plans. Best regards, Volker
Reply
May 17, 2022
Martin
Hallo,
ich besitze Eve Aqua und Weather. Bei Aqua habe ich einen täglichen Bewässerungsplan erstellt. Nun soll bei Regen nicht bewässert werden. Dafür habe ich eine Regel erstellt, dass bei einer Luftfeuchtigkeit über 70% Aqua gestoppt wird. Dafür habe ich eine Szene „Aqua Stop“ definiert.
Nun meine Frage: Wird die Regel ausgeführt wenn der Grenzwert überschritten wird (also nur 1x) oder bleibt Aqua immer geschlossen, wenn der Grenzwert überschritten ist. Letzteres wäre wünschenswert, damit alles automatisch läuft und es wirklich smart ist.
Grüße Martin
Reply
May 15, 2022
Hallo Martin! Ein Auslöser in einer Regel ist immer eine Wertänderung. Wird also hier der Schwellwert erreicht oder überschritten, wird die zugehörige Szene ausgeführt. Dabei ist egal, was später passiert. Im Allgemeinen brauch mach bei Automationen wie der, die Sie einsetzen deshalb zwei Automationen, eine weitere, die etwa eine Szene enthält, die auf Aus schaltet. Viele Grüße, Volker
Reply
May 16, 2022
Andre
Hey
Ich habe einen Eve Aqua und würde den gerne mit einem Bewegungsmelder koppeln
Ist dies möglich ?
Reply
May 11, 2022
Hallo Andre! Ich kenne einige Kunden, die das so machen, etwa um Tiere zu verscheuchen. Sie benötigen natürlich eine Steuerzentrale, da es sich um eine Automation handelt. Wir empfehlen die Nutzung eines Apple TV 4/4K oder HomePod/mini. Viele Grüße, Volker
Reply
May 12, 2022
Rainer
Hallo,
ich habe 2 Eve Aqua der neuesten Generation gekauft. Die Verbindung beider Geräte zu meinem iPhone klappt prima. Nun will ich diese beiden Geräte auch vom iPhone meiner Frau ansprechen können. Ich habe dort die Eve-App installiert. Wenn ich die Geräte aber dort anmelden möchte, kommt die Meldung, dass die Geräte bereits angemeldet seien, ich sie also zunächst entfernen müsse, um sie erneut anzumelden. Am Handy meiner Frau ist aber nichts angemeldet. Was kann ich tun?
Viele Grüße
Rainer
Reply
May 5, 2022
Hallo Rainer! Grundsätzlich ist die Person, die das erste HomeKit-fähige Gerät hinzufügt, der 'Eigentümer' des Zuhause mit allen Rechten. Sie/er kann auf allen seinen iOS-Geräten mit derselben Apple-ID die Geräte sehen und steuern. Familienmitglieder und Freunde, die ein iOS-Gerät mit einer anderen Apple-ID nutzen, muss der Eigentümer zu dem Zuhause einladen:
https://support.apple.com/de-de/HT208709
Dann können auch die Personen auf die Geräte zugreifen und sie steuern.
Viele Grüße, Volker
Reply
May 6, 2022
Paolo
Habe 2 Eve Aqua die beide über thread stabil verbunden waren. Es gibt mehrere thread router, inklusive HomePd mini und Apple TV4k sowie mehrere Eve Energy und NanoLeaf Glühlampen. Alles war mit einander verbunden und hat wochenlang ohne Probleme funktioniert. Letzte Nacht war Stromausfall und danach hat sich alles wieder selbstständig verbunden und funktioniert tadellos weiter...BIS AUF die beiden Eve Aqua. Beise zeigen in Thread beständig "Nicht Erreichbar" und lassen sich durch nichts bewegen sich wieder zu verbinden. Sehr nervig! was kann man tun?! Danke.
Reply
May 3, 2022
Hallo Paolo! Nach einem Stromausfall sind die Thread Border Router dafür zuständig, das Thread-Netzwerk wieder aufzubauen. Das mag etwas dauern, bitte prüfen Sie weiter. Versuchen Sie an den Eve Aqua auch einen Soft-Reboot, entnehmen die Batterien für eine Minute und legen sie wieder ein. Sollte auch das das Problem nicht lösen, öffnen Sie bitte ein Ticket im Support bei uns
https://www.evehome.com/de/support/ticket
Viele Grüße, Volker
Reply
May 4, 2022
Jaden
Hi, can this do 10sec misting every hour?
Reply
May 2, 2022
Hello Jaden! If you want that 24h every hour you need to use an automation as the function Schedule only provides 7 waterings per day. Using automations would require a home hub in range. We recommend using an Apple TV 4/4K or HomePod/mini. Best regards, Volker
Reply
May 2, 2022
Dan Merrill
I just bought the Eve Aqua to work in my greenhouse with my Eve Weather. Do you have any plans, or know of another company to make a HomeKit moisture meter that would work in my garden so I can control the watering based on how dry my soil is?

Thanks, Dan
Reply
May 1, 2022
Hello Dan! We don't, sorry. The only solution I am aware of is a soil moisture meter from Gardena. But this requires the Gardena gateway to integrate it into HomeKit. Best regards, Volker
Reply
May 1, 2022
Nico Hamakers
Is there a sensor that I can use / connect in my irrigation schedule? So I can let the Eve Aqua shut off te water when a certain humidity is reached?
Reply
Apr 19, 2022
Hello Nico! The only soil sensor I am aware of is from Gardena. It needs the Gardena bridge though to integrate into HomeKit. Best regards, Volker
Reply
Apr 21, 2022
Marco
Can I programming open valve for less than one minute? Only 30 seconds for example. Thanks
Reply
Apr 17, 2022
Hello Marco! The Duration can be set to 30 seconds as well, open Eve Aqua in the app Eve in it's room and set it. Best regards, Volker
Reply
Apr 18, 2022
Roland
I have rain water barrels that I would like to use with Aqua to water plants on a schedule. Naturally, water pressure and gal/min are gravity feed only from the water head pressure. This can vary down to zero if a barrel completely empties between rains. I am hoping I can use the Aqua because it doesn't appear to require water pressure to mechanically open and close the valve.
Reply
Mar 31, 2022
Hello Roland! Unfortunately this won't work as Eve Aqua needs a water pressure of: 1-5 bar / 14.5- 72.5 psi / 100-500 kpa. Best regards, Volker
Reply
Apr 1, 2022
James
Can an automation be set up that allows an Eve Motion to turn the Aqua on?
Reply
Mar 14, 2022
Hello James! This can be done of cause. As it is an automation, a home hub is mandatory by Apple. We recommend using an Apple TV 4/4K or HomePod/mini. Best regards, Volker
Reply
Mar 15, 2022
John
Hello, I would like to use it together with Eve water guard ? Is it possible if it is detecting leaking water it will cut water from main pipe ?
Reply
Jan 25, 2022
Hello John! Yes, you can do this setting an automation. Best regards, Volker
Reply
Jan 26, 2022
Uppender Saraon
Can Eve Aqua "talk" to Eve Weather to suspend watering in case of rain?
Reply
Dec 16, 2021
Hello! No, HomeKit enabled accessories can't talk direct due to security reasons. But you can set up an automation/rule with values from Eve Weather and a scene that turns on Eve Aqua. Best regards, Volker
Reply
Dec 17, 2021
Sergio
I’ve a Miele coffee machine with a 2Lt water reservoir connected to a water purifier and I fill it manually everytime the display shows the message: “empty reservoir”. It isn’t comfortable to do it manually, as the machine is in a narrow space. May I use Eve Aqua as time precision switch driven by iPhone 11, planning the start when I need to fill and the switch off after 120 seconds (filling-time)? Random drive is compulsory as it cannot be planned and precise switch off after 120” is mandatory, not to have floor flooding. Thanks.
Reply
Nov 18, 2021
Hello Sergio! I would not recommend at all to even try this. You'd risk to flood the appartement if anything goes wrong, so please don't. Best regards, Volker
Reply
Nov 18, 2021
Brad Monaha
How do you reset a 2nd Generation Eve Aqua?
Reply
Sep 25, 2021
Hello Brad! This applies to all versions. After removing Eve Aqua from the home in Eve or Home from Apple:
https://help.evehome.com/hc/en-us/articles/360009991214-How-do-I-reset-Eve-Aqua-
As this is a typical support question, please use the support system next time:
https://www.evehome.com/en/support/ticket
Thank you and best regards, Volker
Reply
Sep 26, 2021
Ryoi
Can eve have multiple automation pattern across the year? Eg. spring/summer water at night, autumn/winter water in the morning
Reply
Sep 25, 2021
Hello Ryoi! As HomeKit does not provide such features, we can't either for Eve Aqua, sorry. Best regards, Volker
Reply
Sep 25, 2021
Ralf
Hallo,
Ich hatte gestern eine Fehlermeldung bei einem meiner EVE Aqua. ... hat ein Problem beim Betätigen des Ventils festgestellt. Stelle sicher, dass es nicht blockiert ist".
Dem war dann auch so. Wenn es schalten sollte hat es geklackert, aber nicht mehr. Ausgebaut (sprich oben und unten abgeschraubt). Getestet - alles wieder gut. Noch gut gereinigt und dann wieder eingebaut. Funktioniert auch alles. In der iPad App die den Fehler zuerst gemeldet hat, geht die Meldung nun aber nicht mehr weg. Am iPhone kein Problem.
Irgendeine Idee wie ich die Fehlermeldung wegbekomme?
Danke ralf
Reply
Sep 20, 2021
Hallo Ralf! Ich würde das Beenden aller HomeKit-fähigen Apps am iPad erzwingen (https://support.apple.com/de-de/HT201330) und das iPad dann neu starten.
Nutzen Sie für derartigen Anfragen bitte unser Support-System: https://support.apple.com/de-de/HT201330
Viele Grüße, Volker
Reply
Sep 21, 2021
Jeff
Because we have a high mineral content in our local water, gas fired water heaters do not last as long due to fouling (8 to 10 years or may be even less). Manufacturers recommend draining off the bottom periodically to "blow down" the mineral rich lower concentration of water. Water temperature at the bottom is low. What are your thoughts on using this device for automatic blow down for a minute every 3 days or so? I would also restrict the drain valve as the water has to go into my furnace condensate pump to push it into the drain system. What is the valve design (solenoid on off or rotating ball)? Thank you.
Reply
Sep 17, 2021
Hello Jeff! I would not recommend at all using Eve Aqua here. The debris will let the valve stuck - it is a rotating ball.
Best regards, Volker
Reply
Sep 18, 2021
Jerome
What is the maximum flow rate (gallon per minute) the eve Aqua can deliver base on a 60psi pressure ? I have actually 5 gpm on my hose and I was wondering if it will reduce using it. Thanks.
Reply
Sep 17, 2021
Hello Jerome! Eve Aqua has an allowed Water Pressure: 1-5 bar / 14.5- 72.5 psi. The diameter limits the flow rate a bit compared to not using Eve Aqua. So you probably see less than 5 gpm. Best regards, Volker
Reply
Sep 17, 2021
André Toelle
Hallo Ihr. Ich habe Eve Aqua und den Eve Extend installiert. Ein neues Apple TV 4K 2. Gen gekauft und einen zusätzlichen WLAN Range Extender installiert. Die Geräte Kombination schafft es nicht meine Glasterassentür zu überwinden. Wenn die Türe offen ist funktioniert's manchmal. Das kann doch nicht sein! Ich hab jetzt 4 neue Geräte installiert um ein paar Blumen Töpfe zu bewässern.
Ich bin gelinde gesagt etwas entäuscht.
Reply
Aug 13, 2021
Hallo André! Wenn es sich um das aktuelle Modell Eve Aqua (https://www.evehome.com/de/identify-your-eve-accessory) handelt, muss es aus Eve Extend befreit werden. Su nutzt mit dem Apple TV 4K (2021) einen thread Border Router und das aktuelle Modell Eve Aqua muss dann Thread nutzen. Bitte melde Dich per Mail, mit der seriennummer des Eve Aqua, ich erkläre dann, wie Eve Aqua am leichtesten zu entfernen ist aus Eve Extend ist, [email protected]
Das sprengt hier etwas den Rahmen und wäre auch eher etwas für unseren Support: https://www.evehome.com/de/support/ticket

Viele Grüße, Volker
Reply
Aug 13, 2021
A
Can this be set to run indefinitely? I would like to use it as the main inlet for an rv, coupled with leak detection, so that it is always on unless a leak is detected.
Reply
Jul 30, 2021
Hello A! No, the maximum is 4 hours due to security reasons. Best regards, Volker
Reply
Sep 26, 2021
Gabi Roland
Hallo
Ich habe mit ein eve aqua gekauft und die app heruntergeladen
Jedoch logt sich das gerät nicht automatisch ins wifi ein
Gruss
Reply
Jul 24, 2021
Hallo Gabi! Eve aqua nutzt Bluetooth um sich zu verbinden. Ist es in Eve verbunden und es handelt sich um das aktuelle Modell und Du nutzt einen HomePod mini oder das neue Apple TV 4K (2021) als Steuerzentrale, kommuniziert das Eve Aqia via Thread. Allerdings nie per WLAN. Viele Grüße, Volker
Reply
Jul 24, 2021
John
Hi. Wondering what the temperature tolerances of the Eve Aqua are? Can it be left outside in a frost?
Reply
Jul 17, 2021
Hello John! You have to take Eve Aqua inside during winter. Average operating range are: 0°C - 35°C / 32°F - 104°F
Best regards, Volker
Reply
Jul 18, 2021
Hugp
Can we turn off the timer that turns off the valve automatically ?
Reply
Jun 21, 2021
Hello Hugp! You can turn off (deactivate) a HomeKit based automation with the time as a trigger manually in Eve or Home, not automatically. You can create a scene in Eve that would deactivate the Schedule and this can be used in an automation. Best regards, Volker
Reply
Jun 22, 2021
Bert
I understand I can calibrate the water flow with a bucket. This means I will not have any kind of sprinkler system installed then. Let's say it fills the bucket of 10L in 1 minute.
Then I install the sprinkler system that has a flow of 0.5L each 1 minute.
I sprinkle my garden for 30 minutes. What does EVE AQUA indicate? 30 times 0,5L = 15L (the correct value) OR 30 times 10L = 300L?
Reply
Jun 17, 2021
Hello Bert! In this case set the estimated flow rate to 0.5L/min. The measuring is just a hint. In your case you would measure the water that exits the sprinkler system. Best regards, Volker
Reply
Jun 18, 2021
Thomas Menguy
Looking to get an Aqua with thread : planning to put an homepod mini outside, the Aqua would be 25m from it, will it work? If no what is the max range you have measured for a Thread device?
Thanks
Reply
May 13, 2021
Hello Thomas! 20 meters may be on the edge. You could add an Eve Energy (EU/UK/US) with Thread support half way it would act as a Thread router. Best regards, Volker
Reply
May 13, 2021
Mark Rayson
Does the Eve Aqua reduce the water pressure of the outdoor tap? I've bought 2 of these to use in my back garden which is currently being landscaped. The guys have just today started laying out the sprinklers, 2 zones with 5 pop-up sprinklers in each. They saying with the zones connected directly to the taps, the pressure is fine for the sprinklers to work but going through one of the Eve Aqua's the pressure isn't enough for them to really work as well as without it. They took the little rubber filter piece out of it which improved things a bit but still wasn't enough. Looking through the connector, it looks like when you turn the Eve Aqua on, the hole through the device is smaller where the mechanism moves to shut the water off than it is at the tap connector. This looks like it's going to make the devices useless for me as the sprinklers aren't going to work with the Eve Aqua's inline.
Reply
May 4, 2021
Hello Mark! Yes it is reduced a bit, because the diameter is reduced a bit in the middle of the accessory. Best regards, Volker
Reply
May 5, 2021
Jonas Lindgren
I have two questions:
- Can I have multiple EVE Aqua to create separate zones that are scheduled independently but within the same app?
- Is there a way to connect EVE Aqua to Wifi and also to internet bridge for remote config?
best regards, Jonas
Reply
May 2, 2021
Hello Jonas! You can use many Eve Aqua with the app Eve (or Home from Apple). In Eve you can set an individual watering plan for each Eve Aqua you have. For any remote access a home hub is mandatory by Apple. When using the letest model of Eve Aqua we recommend using a HomePod mini or the upcoming new Apple TV 4K because it supports Thread. Best regards, Volker
Reply
May 3, 2021
Philippe
Bonjour, aqua Ève ne fonctionne qu’avec Apple svp?
Merci
Reply
Apr 29, 2021
Bonjour, les produits de la gamme Eve ne supportent que les app et accessoires compatibles HomeKit d'Apple. Aucune autre architecture (Android, Alexa, Google Home, IFTTT, ZigBee, etc.) n'est supportée : https://help.evehome.com/hc/fr-fr/articles/360023113173
Reply
Apr 30, 2021
Chris Thomas
Est ce que je peux commander plusieurs(3) Eve Aqua avec l’application ou Siri ?
Reply
Apr 23, 2021
Bonjour, vous pouvez contrôler jusqu'à 1000 accessoires avec l'app Eve ou Siri.
Reply
Apr 24, 2021
Sander
What are the differences between Eve Aqua 1st and 2nd generation?
Reply
Apr 5, 2021
Hello Sander! The actual model can use Thread, the 1st generation not, please check here: https://www.evehome.com/en-us/identify-your-eve-accessory
Best regards, Volker
Reply
Apr 5, 2021
Jörg
Hallo Volker
meine Aquas haben die Modelnummer
20EBMx101
diese Nummer finde ich nicht in der Geräteliste
Gruß Jörg
Reply
Apr 1, 2021
Hallo Jörg! Es handelt sich in allen Fällen und das alte Modell, das kein Update für Thread bekommen kann. Auf dem Chipset fehlt das radio für IPv6. Viele Grüße, Volker
Reply
Apr 2, 2021
Binh Nguyen
Is this the second generation of Eve Aqua and what's the difference in feature or hardware with second generation?
Reply
Feb 20, 2021
Hello Binh! Please check our page here: https://www.evehome.com/de/identify-your-eve-accessory
The actual model will support Thread after a firmware update that is not out yet, the old model won't. Have a great weekend, Volker
Reply
Feb 21, 2021
Abe
Can you connect the Eve Aqua with the Eve Eve Water guard so Eve Aqua will shut off the water if Eve Water guard senses there is water in an area you don't want water?
Reply
Nov 27, 2020
Hello Abe! This can be done with an automation. But: As for any automation a home hub is mandatory, an Apple TV 4/4K or HomePod/HomePod mini. I wish you a great weekend, Volker
Reply
Nov 28, 2020
Joe Cordes
Can Eve Aqua be Scheduled to water once a month?
Reply
Oct 15, 2020
Hello Joe!

This can't be done with the function Schedule in Eve, sorry. Best regards, Volker
Reply
Oct 15, 2020
Add new comment